Primary tabs
Biocide 7000
Biocide 7000 is a broad spectrum liquid microbiocide for use in a variety of water treatment applications, including open and closed recirculating cooling systems, paper mills, air washers and non-potable water storage. Biocide 7000 causes immediate inhibition of growth on coming in contact with micro-organisms.
It controls a wide variety of algae, bacteria and fungi found in industrial water systems. Effective control of such a wide variety of micro-organisms is achieved at low concentrations, which makes Biocide 7000 is an extremely cost-effective treatment.
Biocide 7000 readily penetrates the surface of adhering biofilms and its biocidal action prevents micro-organisms from forming the sticky materials which are necessary to form biofilms in the first place. Thus Biocide 7000 is extremely effective against biofilm formation and at biofilm removal.
Biocide 7000 is stable over the wide range of conditions found in industrial water applications. It is stable in the presence of 1ppm free chlorine and its stability compared with many other biocides at different levels of pH, temperature and total water hardness is excellent. Biocide 7000 has been shown to be effective against Legionella species even at low concentration and high pH levels, although it is not recommended for use as a disinfectant. Further details are available
upon request.
Biocide 7000 is compatible with our entire range of corrosion and scale inhibitors and its stability and effectiveness in alkaline conditions makes it suitable for use as part of our 'High pH Solution for Open Evaporative Cooling Systems.
ADVANTAGES
- Broad spectrum activity against algae, fungi and bacteria, including
- Legionella Pneumophila and sulphate reducing bacteria.
- Very effective against biofilms.
- Effective over a wide range of pH, temperature and water hardness.
- Readily biodegradable when diluted.
- Low toxicity.
- Compatible with low levels of free chlorine or bromine as well acorrosion and scale inhibitors.
- Can be used to disinfect certain ion exchange resins.
- Does not contribute significantly to the AOX (Absorbable Organic
- Halogens) level in a typical industrial effluent.
- Does not interfere with the functioning of wastewater treatment plants, and is degraded readily by them.
- Effective at low concentration - cost effective.
- Not surface active - non-foaming.
HANDLING :
This product in a strong irritant to skin and eyes, both as a concentrate and as a solution. Eye and skin contact should be avoided by wearing PVC/ rubber gloves and goggles as well as protective overalls.
STORAGE :
Store in cool, well ventilated area. Keep container tightly closed. Do not store with Alkalies such as Category B and C products or oxidising agents such as Category I and J products.
| Form | Liquid |
| Colour | Pale Green |
| Odour | Perceptible odour |
| Odor Threshold | No Information Available |
| pH | 3.5 - 4.5 |
| Boiling Point | 100°C |
| Flash Point | Not Applicable |
| Relative density Information | 1.025 - 1.05 at 25 °C |
| Solubility | Soluble in water |
| Siscosity | Non Viscous |
This product has been classified in accordance with the hazard criteria of the Canadian Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR.
To comply with New Jersey DOH Right-To-Know labeling law (NJAC 8:59 – 5.1 & 5.2)
CAS. No.: CHEMICAL INGREDIENTS
7732-18-5 Water
13463-67-7 Titanium dioxide
25265-77-4 2,2,4 - Trimethyl - 1, 3 - pentenediol monoisobutyrate
Not Available Proprietary surfactant
Not Available Latex resin solids