Primary tabs
Labdet Lab Cleaning Solution
LABDET is highly concentrate Product use for cleaning the lab glassware and lab equipment. It is consists primarily of a homogeneous blend of surfactant,and ethoxylated alcohol. Labdet is anionic in nature.
Used to clean:
Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, disk drives, clean rooms, medical devices, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, pipes, tanks and reactors. Authorized by USDA for use in federally inspected meat and poultry plants. Passes inhibitory residue test for water analysis. Used for phosphate sensitive analysis ware.
Used to remove:
Soil, grit, grime, slime, grease, oils, blood, tissue, particulates, deposits, chemical and solvents.
Surfaces cleaned:
Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, cement and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Used for art restoration. Corrosion testing may be advisable.
Cleaning method:
Soak, brush, sponge, cloth, ultrasonic, flow through clean-inplace.Will foam—not for spray or machine use.
Directions:
Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 ml per liter) in cold, warm or hot water. If available, use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe or ultrasonic method. Not for spray machines, will foam. RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic and metal surfaces. Corrosion testing may be advisable.
Benefit :
- Concentrated to save you money
- Use to pass your cleaning validation tests for lab accreditation and plant inspection approval
- Replaces corrosive acids and hazardous solvents
- Phosphate free, biodegradable and readily disposable
- Free rinsing to give you reliable results and no interfering residues.
Precautions:
No special precautions other than good industrial hygiene and safety practices employed with any industrial chemical (see Directions).
| PHYSICAL DATA | TYPICAL VALUE |
| pH as is | 8.5 |
| Specific gravity (g/ml) | 1.07 |
| Density (lbs./gal.) | 8.9 |
| Vapor pressure (mm Hg) | 10.5 |
| Flash Point (degrees F) | None |
| Phosphate Content (as Phosphorus) | 0% |
| Organic Carbon (% calculated w/w) | 21% |
| Fragrance Content | 0% |
| Surface Tension 1% Sol’n (Dyne/cm) | 32 |