Primary tabs
Drain Pipe Cleaner
Specially designed to rapidly break pipes to restore flow and clear blockages. Heavy DUTY and fast effective Descaler for any type of metal (except for soft metal like aluminium and zinc). This scales remover for sewage pipe lines and evac systems . It contains special inhibitors to make its after on most metals, concrete and plastic surfaces. Drain Blaster cuts down the need to plumb or rod, or excavate when the build-ups occur.
OTHER NAME : BLOCKED PIPE CLEANER, PIPE-CLEAN, DRAIN PIPE CLEANER
Directions for Use and Dose Rates :-
The most effective method is circulation for large systems or components likeboilers, evaporators, condensers, heat exchangers and generally closed systems that have the capability to circulate at a temperature of approximately 40-60°C, for 6-12 hours and solutions of 10-40% of Drain Scale Remover in water. Keep in mind that the strength of the solution is analogous to the degree of deposition of scale .
In case of small components , the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonized oil, then first of all clean the system with RXSOL OB 1005.
Drain Scale Remover should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling.
After using Drain Scale Remover it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alakleen Liquid or Liquid Soap in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces. Drain Scale Remover should not be used on Aluminium, Zinc, Tin, or any Galvanized Surfaces for which a special grade cleaner should be used.
Scales remover for sewage pipe lines and evac systems
Drain cleaner will remove: lime scale, rust deposits and organic obstructions.
• Rapidly breaks down organic deposits and paper from drains and waste pipes.
• Generates heat on dilution to soften fat and grease.
• Heavier than water, flowing around the waste tap to the source of restriction.
• Restores flow and clears blockages.
APPLICATIONS
Usefull for clearing of blocked drains, sinks, toilets & urinals.
Its Higher concentration quickly dissolves organic obstructions, such as grease, hair, textiles, sludge, soap etc
Removes lime scale & rust deposits.
Other Details:
- The cleaning and maintenance of pipes of washbasin and sinks is a strenuous and difficult task, but Drainup Drain Cleaner makes your work easy.
- It effectively cleans blockage of the pipes of washbasins and sinks.
- Frequently chopped food particles gets jammed and clogged in the entrance of the pipes and produces wreckage that effects the regular flow of water resulting in foul smell, but drainup drain cleaner removes the blockage very easily without costing much of your time.
- Drainup Drain Cleaner is your instant solution to remove oil and dirt materials from drainpipes.
- One time use pack.
- 3 action instant drain clean.
Application:
- Remove excess water from blocked kitchen sink, wash basin or tub.
- Pour the content into the blocked sink.
- Add a cup of water and leave for approximately 30min.
- Flush well with water.
- Repeat application for stubborn blocks.
Features:
- Clears clogged drains
- Melts grease and hair
- Keeps drain germs free
A plumbing detergent designed to dissolve clogs pipes. Dissolves everything except glass or metal without damaging the piping.
1.Carefully and slowly pour into the drain (do not add water to the product).
2.Allow to stand for up to 15 minutes.
3.If the blockage has cleared, carefully flush the pipe work with water. If drainage is slow, repeat the process.
In the event of the blockage not clearing, a drainage engineer/plumber should be contacted. Ensure that they are warned that the drain contains a concentrated acid solution.
DOSE LEVELS
Small drains : 0.25 Litres
3” – 4” drains : 1 Litre
6” – 8” drains : 2 Litres
Grease Traps : 0.5 - 1 Litre
Extremely powerful liquid to rapidly unblock and open drains
- Rapidly clears hair, soapscum, fats, paper, organic debris and slime
- Generates heat on dilution softening debris for rapid release.
- Suitable for both indoor and outside drains, this powerful product must be used with extreme care
- Suitable for use in schools, businesses and public buildings by maintenance engineers and professional caretakers
- Heavy duty commercial performance
DIRECTIONS FOR USE
1. For professional use only.
2. Read the label and MSDS carefully before use.
3. Wear appropriate protective clothing, gloves and eye/face protection.
4. DO NOT MIX WITH BLEACH or other cleaning chemicals.
5. Do not apply if the toilet/drain is overflowing. Remove excess fluid where appropriate.
6. Assess where the likely source of the blockage is. If the drain is totally blocked with no flow and the blockage is too far away, Blockbuster would not be an appropriate treatment and a qualified drainage engineer/plumber should be contacted.
TECHNICAL DATA
APPEARANCE : Viscous Liquid
COLOUR : Black
ODOUR : Characteristic/acidic
SOLUBILITY : Completely soluble in water
RELATIVE DENSITY : 1.80
USAGE PRECAUTIONS
Avoid spilling, skin and eye contact. AVOID ALL CONTACT. Never add water to acid! Do not use in confined spaces without adequate ventilation. Do not mix with bleach or other toilet cleaners.
500 Grams / 1 / 5 / 10 / 25 / 35 / 210
STORAGE PRECAUTIONS
Store in tightly closed original container in a dry and cool place.
HEALTH AND SAFETY
Health and Safety Data sheet available separately.