Primary tabs
SOLVENT C9
Aromatic hydrocarbons are a series of organic molecules that form flat ring-shaped bonds
Aromatic hydrocarbons are a series of organic molecules that form flat ring-shaped bonds. Aromatic hydrocarbon C9 resins are conventionally named because it is defined by the number of carbon monomers in the chemical. C9 have a distinctive aromatic odour and a typical Gardner colour of 6-10 (dark yellow to dark brown). It is insoluble in water, low alcohols and ketones, however are soluble in aliphatic hydrocarbons and chlorinated hydrocarbon solvents.
The products will serve a broad range of industries and applications like Paints and Coatings, Printing Inks and Reducers, Offset inks, Agro-chemicals, Surfactants, Emulsifiers, Oil Field Chemicals, Foundry Chemicals, Water Treatment Chemicals, Disinfectants, Wash Oils,, etc. The emphasis is on significant value addition through development of specialty chemicals and niche products. Som application as below :
-
C9 is mainly used in adhesives, printing inks, sealants, polychoroprene rubber, concrete curing compounds, anti-drying agents and paints.
-
It has a good compatibility with SBR, SIS, SEBS and SEPS and can be used as a pressure sensitive adhesive, hot-melt adhesive and synthetic rubber.
-
C9 can also be applied to coatings on ships, vehicles and bridges because they will improve the lustre, increase hardness and make areas more water resistant.
-
Within the printing industry, it will increase water resistance, solvent consumption and resistance to dry.
-
It is also used for hot road markings.
- The end user markets for this product are the paints, coatings and rubber industries.
|
Aromatic Content |
: 99.56 %wt |
|
Appearance |
: Clear, Free of Foreign Matter |
|
Benzene |
: < 10 ppm wt |
|
Non-Aromatics |
: 0.44 %wt |
|
Acidity |
: No Free Acid |
|
Copper Strip Corrosion |
: Pass 1A |
|
APHA Color |
: 3 |
|
Initial Boiling Point |
: 164.1°C |
|
Dry Point |
: 177.2°C |
|
Specific Gravity @ 15.6°C |
: 0.8763°C |
|
Density at 15°C (in Vacuum) |
: 0.8759g/mL |
|
Density at 15°C (in Air) |
: 0.8748g/mL |
|
Density at 30°C (in Air) |
: 0.8628g/mL |
|
Density at 30°C (in Vacuum) |
: 0.8639g/mL |
|
Total Sulfur |
: 0.1 ppm wt |