Primary tabs
Slip Barrier Coats HOLD BLOCK
Polymer water Resist thin layer on HOLD surface not only helps to keep ship hold surface ready and clean after discahrging the cargo but also providing protective layer from Hazardous cargo like Sulphur, Salt etc. Slip Barrier Polymer Coats HOLD BLOCK is providing thin layer on metal surface, which can be easily remove by high water pressure. POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.
Slip Barrier Polymer Coats HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carrying corrosive and / or messy cargos such as sulphur salt petcock coal and concentrates. It can be easily removed with it
Recommendation Dose for smooth surface :
for Sulphur, Salt, etc 100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc 200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX
This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.
for HANDYMAX (5 Holds) : In general 500 Ltr to 1000 Ltr RXSOL-22-2210-210 require to cover area up to 12 mtrs , i.e approx 1/2 drum to 1 drum of material is sufficient for each hold , while
for PANAMAX (7 Holds) : In general 1000 Ltr to 2000 Ltrs RXSOL-22-2210-210 require to cover full area. , i.e approx 3/4 drum to 1.25 drums of material is sufficient for each hold.
This Emulsion is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.
Precaution : 1 > Deposition of previous cargo / Lime wash should be removed .
2 > Newly Painted surface should be fully cured.
Other Valuable Hold Cleaners :::
Cement Remover RX Hold ::: Highly concentrated and powerful penetrating agents materials which is effectively react with cement to loosen the bonding strength . Best results can obtain on dry surface of cement. RXSOL'S R & D has developed this molecular cement dissolver. Part No.- RXSOL-22-2202-025, Part No.- RXSOL-22-2202-020, Part No.- RXSOL-22-2202-050
- Product metal against corrosive cargo
- Products paint against cargo penetration
- Environmentally friendly
- Safe to use in occupied / covered areas
- Reduces turn around times
- Easy to direct spray
- If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
- Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
- And don’t forget procedures have to be drown up and your
- Crew trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time
Protective Chemicals suitable for both sulphur and petcoke cargoes.