Primary tabs
Degreaser Solvent
Degreaser Biosolv is a liquid degreaser made with 100 % of natural Ingrident. It contains rice bran fatty acid and biodegradable emulsifying agents.
Degreaser Biosolv has been specially formulated for vertical surfaces so that it can dissolve easily: grease, pitch, heavy oil, asphalt, urethane, coal , mastic, inks, creosote and all others kinds of heavy dirt. It can also be use on concrete surfaces and engine area.
General Cleaning : Apply Degreaser Biosolv (dilute 25-50ml / litre of water) on the surface to clean and let the solution work a few minutes. Rinse with cold or hot water. For concrete surfaces, use Degreaser Biosolv (pure) and brush the floor in order to make the product penetrate. Let the product work a few minutes and rinse with cold or hot water.
Engine Shampoo : Apply Degreaser Biosolv on the motor surface; it is preferable that the motor is hot in order to add efficiency to Degreaser Biosolv Wait few minutes and rinse with cold or hot water to remove grease.
ADVANTAGES
- Less toxic and made from biodegradable ingredients.
- 100 % active product.
- Contains special additives and corrosion inhibitor to protect clean metal surfaces.
- Very effective emulsifier for grease, turning white to ease the rinsing.
- Non - Corrosive
- Best product to control bad odours and to clean viscous deposits.
pH (as is) | 6.5-7.0 |
Colour | Yellow |
Fragrance | Discrete citrus |
Characteristic | Non Flamable |
Biodegradability | Complete |
Flash Point | NA |
Freezing Stability | Stable |
Degradability determined in accordance with OECD no. 301D. |
pH (as is) | 6.5-7.0 |
Density (20 C ) | 0.82-0.86 g/cc |
Colour | Yellow |
Fragrance | Discrete citrus |
Characteristic | Non Flamable |
Biodegradability | Complete |
Flash Point | NA |
Freezing Stability | Stable |
Density | 1.1 |
Degradability determined in accordance with OECD no. 301D. |
pH (as is) | 6.5-7.0 |
Density (20 C ) | 0.82-0.86 g/cc |
Colour | Yellow |
Fragrance | Discrete citrus |
Characteristic | Non Flamable |
Biodegradability | Complete |
Flash Point | NA |
Freezing Stability | Stable |
Density | 1.1 |
Degradability determined in accordance with OECD no. 301D. |