Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

Corrosion Inhibitor Cool Water Treat

0
No votes yet

Product Qty Per Unit: 
30.00
Product usage unit: 
Kg.Liq

Negotiate Price

Product Delivery Locations: 
Visakhapatnam, Vijayawada, Kakinada, Gangavaram, Krishnapatnam, Rawa, Nellore, Rajahmundry

Organic liquid corrosion inhibitor with low-toxic poerty provides long-life corrosion protection for closed cooling water systems . Rxsol Cool water treat will protect all commonly used materials in engine cooling water systems, including aluminium. Cool water treat

Product Description: 

Corrosion Inhibitor Cool water Treat is specialized Cooling Water treatment chemicals for a re-circulating water system.  Nitrite Based corrosion inhibitor Suitable for all types  water circulation cooling. 

Product Application: 

Liquid product, easy to use. Environmentally friendly, fully organic product, low toxicity. Effective against cavitation and erosion. Superior heat transfer properties. Compatible with hoses, gaskets and seals. Compatible with glycols for frost protection. Stable product - non-depleting. The product can be used for corrosion inhibition in many types of closed re-circulation system such as: - Diesel engine cooling water systems - Compressor cooling water systems - Centralised cooling systems - Hot water heating systems - Auxiliary machinery cooling systems.

Product Procedure: 

Using Method : -

Corrosion Inhibitor Cool water Treat  is a highly effective corrosion inhibitor for all common metals in cooling water systems.Where most traditional inhibitors react with the metal surface and form oxides that prevent further corrosion, Cool water treat  applies a thin and durable layer of protective molecules to the metal surfaces. This technology prevents the continuous build-up of insulating layers on heat transfer surfaces.

For new builds, RXSOL  recommends cleaning of the water system before commercing service. The system will always contain small amounts of oil and iron oxides, and this can be easly removed in 1 time with Rxsol Commissioning Cleaner. If the system is corroded or is more heavily contaminated use Rxsol Degreaser HD. RXSOL Safe Acid  for removal of metal oxides or scale is recommended.
For systems previously treated with other products, RXSOL recommend to drain and flush the system before refilling with distilled water and Cool WATER treat . The system should be clean and free from scale and corrosion products when starting the treatment.
The use of antifreeze is sometimes required if the vessel is to be laid up in cold areas, Cool water treat  can be used in conjunction with glycols for frost protection. If used in conjunction with glycols, It is recommended to increase the product concentration to 8%.

Dosing method
Cool water treat  should be dosed to a suitable point in the system. If the expansion tank is used, adequate circulation must be assured.
Dosage and control
Cool water treat  should always be present in a concentration of 5% or higher in the system. It is good practice to start with initial dose for an untreated system of 60 litres of Cool WATER treat /ton. 5% will provide sufficient protection of the system for a period of two to five years under normal conditions provided. To prevent residual falling below minimum level due to loss of cooling water, RXSOL recommend to maintain a level of 6% Cool WATER treat  in the cooling system.
The engine manufacturer's recommendations for water quality should always be complied with. Cool water treat  provides good protection even with contamination of the system by i.e. inorganc salts. Maintain Chloride levels and other contaminants at a minimum level. Most engine manufacturers recommend a maximum of 50 ppm Chlorides.

Product Note: 

CHEMICAL,PROCESS, CORROSION INHIBITOR, LIQUID KG
COMPOSITION / INFORMATION ON INGREDIENTS:

- AN AQUEOUS SOLUTION OF SODIUM NITRITE

- Content : SODIUM NITRITE 

- CAS # 7632-00-0

 

Product Technical Specification: 

PHYSICAL AND CHEMICAL PROPERTIES

- PHYSICAL STATE : LIQUID

- ODOUR : MILD

- PH : 12.5 13.5

- FREEZING POINT : < - 10 °C

- INITIAL BOILING POINT : > 100 °C

- SOLUBILITY IN WATER : COMPLETE

- COLOR : PINK

Product pack size: 
1, 5, 10, 20, 25, 50, 210 Ltr. Suitable corrosion inhibitor for closed re-circulating water system of Engine. Factory discounted sale price is applicable for Visakhapatnam - Kakinada, Kolkata - Haldia, Chennai - Ennore, Mumbai - JNPT, Surat - Hazira, Mangalore, Kandla - Gandhidham. And in the Middle East - Fujairah - Dubai, Sharjah, Abu Dhabi.
Product alias: 
<p> Nitrite Based corrosion inhibitor, C.W.T. Inhibitor, COOL water TREAT NCL, RXSOL 9-111, AQUATREAT CS 8535, AQUATREAT CI 6643, CORRSHIELD NT 4209</p>
Remarks: 

WHERE USED:

- RR WEST UNITS

- CBDC UNIT U-2026: USED IN FRESH COOLING WATER SYSTEM (U-2026) OF CBDC TO  PROTECT CARBON STEEL AS WELL AS YELLOW METALLURGY OF FCW COOLERS. FROM CORROSION AND CONTAINS PH BUFFERS TO DEFEND THE SYSTEM AGAINST PH CHANGES.

 

NOTE :

- SHELF LIFE REQUIRED IS 2 YEARS (MINIMUM) FROM DATE OF PRODUCTION 

Item Specs:

GENERIC TYPE: CORROSION INHIBITOR

FORM: LIQUID

SERVICE: WATER TREATMENT

 

SKU:
RXSOL-81-6643-999
Title:
Corrosion Inhibitor Cool Water Treat