Primary tabs
Anti Skid Powder
AntiSkid is a mineral powder, intended to be mixed into all kind of Paints topcoats and varnishes.
Recommended use
For use on decks, floors, gangways and other areas where additional friction properties are required. AntiSkid may be added to wet paint and applied by spray or broadcast or sprinkled into the wet film during application.
Surface preparation
Coated surfaces
According to specifications for the chosen topcoat.
Other surfaces
The coating may be used on other substrates.
Storage
The product must be stored in accordance with national regulations. Storage conditions are to keep the containers in a dry, cool, well ventilated space and away from source of heat and ignition. Containers must be kept tightly closed.
Handling
Handle with care.
Packing size
25 Kg
Health and safety
Please observe the precautionary notices displayed on the container. Use under well ventilated conditions. Do not breathe or inhale mist. Avoid skin contact. Spillage on the skin should immediately be removed with suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought immediately.
Physical properties
| Colour | Light grey |
| Solids (vol %)* | 100 ± |
| Flash point | None-flamable |
| Specific Gravity | 2,3 kg/ltr |
DISCLAIMER
The information in this data sheet is given to the best of our knowledge based on laboratory testing and practical experience. However, as the product can be used under conditions beyond our control, we can only guarantee the quality of the product itself. We also reserve the right to change the given data without notice. Minor product variations may be implemented in order to comply with local requirements.
Rx Marine International is a World Wide company with factories, sales offices and ware house in all the ports of india and UAE . please visit our website at www.rxmarine.com.com