Primary tabs
ANTI SCALANT for WASTE WATER
ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION PHOSPHONATE-BASED
Scale Inhibitor Antiscalant is specially designed to inhibit the scale formation ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION
It is a stabilized solution of organic phosphonates and polyacrylates with high dispersing effect. Scale Inhibitor Antiscalant is an excellent inhibitor for calcium sulphate and calcium carbonate. A further advantage is the excellent stabilizing effect for barium and strontium sulphate. In addition even iron may be stabilized. The contained copolymers act also as a dispersing agent for organic contaminants and metal oxides.
Scale Inhibitor Antiscalant is highly efficient scale inhibitor for Scale Inhibitor Antiscalant is specially designed to inhibit the scale formation ANTI-SCALANT FOR WASTEWATER TREATMENT SYSTEMS - SLUDGE LINE APPLICATION
Other areas of application ANTI SCALANT for WASTE WATER
- Wastewater treatment plants and sludge transfer lines
- Industrial effluent and process water systems
- Cooling and recirculating water systems
- Desalination pre-treatment and filtration units
The dosage is controlled proportionally by Standard metering pumps are used. Fitting materials are PE, PP or coated steel. In order to avoid biological fouling, the containers have to be cleaned from time to time with a 10 % sodium bisulfite solution or a sodium hydroxide water solution solution at pH=13.
Scale Inhibitor Antiscalant can be diluted with water in any ratio. However, it is recommended to inject the antiscalant undiluted or as solution up to 10 %. The diluted solutions have to be consumed within 48 hours after preparation. The required dosage level depends on the operating conditions and water composition and varies in the range of 1 – 10 ppm as delivered.
Key Features of Sludge Antiscalant
- Prevents formation of calcium and magnesium scale deposits
- Controls fouling and scaling in sludge and wastewater systems
- Compatible with most coagulants, flocculants, and biocides
- Enhances heat transfer and flow efficiency
- Effective in a wide pH and temperature range
| Appearance | : Clear, yellow liquid |
| Density | : 1.14 – 1.16 g/cm3 |
| Viscosity | : Approx. 50 mPa.s |
| pH-value | : 4.8 – 5.3 |
| Boiling Point | : 105° C |
| Freezing Point | : -10° C |
| Solubility in water | : unlimited |