Ballast Tank Cleaner/Mud & Silt Remover supplier Distributor Manufacturer in Visakhapatnam india

Vizag   Chemical is a leading manufacturers, suppliers, exporters, traders, dealers, retailers, producers of Ballast Tank Cleaner/Mud & Silt Remover     available across Visakhapatnam  India. 

Vizag  india  chemical is one of the leading manufacturer, supplier and exporte of Marine chemical, Construction Chemicals,Miscellaneous Industrial SuppliesOil & Gas,PaintPaper Manufacturing, Pharmaceuticals Plastic Manufacturing,Printing Inks,Soaps & DetergentsTextiles,Water Treatment & Pool allied products and services in Vizag  India.

Ballast Tank Cleaner/Mud & Silt Remover It is a odorless Colorless /Hazy Water White POLMERISED viscous liquid for Removal of sediments, silt and mud from Ballast Tank . Its polymerization dual
effect mechanism help to prevent hard deposition of mud layer on metal surface as well as keeps mud particle in loose condition which causes more labor to clean .

 APPLICATION: POLYELECTROLYTE conditioner is highly economical, non toxic, non polluting chemical its lower concentration effectiveness with water keeps it in very ECONOMICAL GRADE materials class. 

1. Proven cost effective
2. Ready-to-use
3. Concentrated formula
4. Very low usage rates as 5 ppm
5. Safe, aqueous product
6. Dosing equipment available

Field for Use:

1. Ballast Tanks
2. Double Bottom Tanks
3. Floating Dry-docks
4. Manual Tank Cleaning
5. Cooling Water Systems

Application:-

it  may be fed full strength, or diluted with clean water, depending upon the application.Ballast Tank Cleaner/Mud & Silt Remover  works best when injected into ballast piping or the ballast pump discharge during ballasting. Rx Marine offers either automatic or semi-automatic injectionsystems. Each system consists of a 50 or 100 gallon supply tank, with high pressure injection pumps Connected to a RX MARINE INTERNATIONAL. Special 316 SS injection nozzles are also supplied to assist in dispersing and mixing the chemical in the ballast pipes.Installation of these systems is straightforward. All that is required is to bolt or weld the tank in place, run tubing from the injection point, and provide shipboard power to the controller. Operation of these units is also easy. Standard systems need only to be turned on when the ballasting procedure begins, and off when the ballasting is finished. Automatic systems are designed to turn themselves on and off as needed, and require no operator assistance, except to check the holding tank level. Applications such as tank cleaning, dry-docks and oncethrough cooling g systems may require other types of injection systems.

We try our best to supply every chemical you may wish to buy. However, if there is something you can’t find, feel free to contact us and we will find just what you are looking for and offer you a competitive price. For more information or to request a particular product, call customer services or Given website Email address.