Primary tabs

FREE SHIPPINGFree shipping on all orders over 100000 INR.

ReleasePro Concrete Formwork Release Agent

No votes yet

Product Qty Per Unit: 
Product usage unit: 

Negotiate Price

Product Delivery Locations: 
Visakhapatnam, Vijayawada, Kakinada, Gangavaram, Krishnapatnam, Rawa, Nellore, Rajahmundry

High-performance formwork release agent that guarantees simple release, minimizes blow holes, and produces a uniformly hard, smooth, and polished concrete surface.

Product Description: 

ReleasePro Formwork Release Agent is a specifically designed combination of low viscosity hydro carbon carrier mineral oils, chemicals, and a chemically active release agent that facilitates the effortless release of form work and gives concrete a high-quality finish.
For a clean release, it works well on shutter faces and molds before concrete is cast. following the formwork's removal. There are fewer blow holes and a smooth, consistent finish to the applied concrete surface.
Mixrelease. ReleasePro Formwork Release Agent reacts with cement to give treated surfaces superior release qualities. 

Product Application: 

When using a new mold, ReleasePro Formwork Release Agent can be applied directly to the mold; however, when using an old mold, any adhering material residue needs to be removed using the appropriate techniques before using the mold. Applied with a roller, brush, or spray.

Unsealed timber surfaces should be recoated if a delay in using the mould causes the release agent to seep into the timber. Non-absorbent surfaces only need to be applied once.

Product Procedure: 

Although the dosage or covered area is according to the mould surface, on an average ReleasePro Formwork Release Agent convers 50-70 meter sq per ltr

Product Note: 

Advantages of using RXSOL ReleasePro Formwork Release Agent

  • Works well with all cement variety
  • Very economical as it reduces labor
  • Reduces chances of damage to formwork
  • Fit for plastic-faced molds and formwork made of steel, wood, and plastic
  • Contains specially formulated corrosion and rust inhibitors
Product Technical Specification: 


Physical state Liquid
Colour Colorless, to, yellow
Odor Stinging, hydrocarbon-like
Melting point/freezing point Melting point/range: < -20 °C - ASTM D 97-66 - (External MSDS)  
Initial boiling point and boiling range    150 - 200 °C


Product pack size: 
25 Ltrs, 210 Ltrs Drum, and 1000 Ltrs IBC Tank
Product alias: 
<p> MIXRELEASE MRA, Formwork Release Agent</p>





ReleasePro Concrete Formwork Release Agent