Primary tabs
Antifreeze Coolant with Sebacate
Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and
RXSOL ANTIFREEZE Corrosion Inhibitor Sebacic acid is widely used to produce a salt derivative, the (di)sodium sebacate, which is a corrosion inhibitor. The main application of this salt is coolant (anti-freeze) fluids for aircraft, automotive and truck engines.
Solution Strength :
25 Ltrs RXSOL-16-4020-020 : 75 Ltrs Water gives freezing protection up to -140C "or" 25% solution (1 part anti-freeze to 3 parts water)
For extra cold / winter climate , increase to a 33% solution (1 part anti-freeze to 2 parts water) to give freezing protection down to -170C.
EYES : Irrigate copiously with clean, fresh water for at least 15 minutes. Seek medical advice.
SKIN : Wash immediately with plenty of water. Remove contaminated clothing. If irritation persists seek medical attention. Wash contaminated clothing before using them.
INHALATION : Remove to fresh air. If breathing is irregular seek medical advice.
INGESTION : Obtain immediate medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.
Introduction
Antifreeze compound for cooling water systems , It is a Very effective blend of GLYCOL classified chemicals along with CORROSION inhibitor to protects all engineering precious metal including aluminium . Its chemically treated layer protect radiators and engines, against rust and corrosion. Its proper dose in cooling system gives full protection from corrosion.
It is biodegradable and does not present an environmental problem.
Antifreeze
APPLICATIONS
Antifreeze Special is free from amine, phosphate and nitrite etc. And uses as engine Antifreeze as well as coolant. This product is based on ethylene glycol. It contains a corrosion inhibitor, salts of organic acids and silicates (Si-OAT). It protects all metallic parts against corrosion and deposits in the cooling system.
Benefit
The product protects all parts of cooling system from frost, oxidation and overheating.
It has long-term protection against corrosion for all materials used in the engine and radiator construction, such as cast iron, aluminium, copper and solder alloys as well as a good compatibility with hoses, seals or plastics.
It contains carefully selected amine, nitrite, boron and phosphate free inhibitors and is therefore environmentally friendly.