Alkaline Powder for Removing Oil, Grease, Carbon, Rust, Scale & Paint info Chemical Man

Vizag chemical  is an advanced, highly alkaline industrial detergent and cleaning agent available in a concentrated powder form. It is scientifically formulated for the effective cleaning and removal of oil, grease, carbon, rust, scale and paint from surfaces.

vizag chemical  is a technically advanced industrial cleaning product that has a detergent type action, penetrating the surface film and mechanically lifting deposits from the underlying sound material, breaking them up and dispersing them into the body of the solution.

As the cleaning operation of this high performance product is a surface action, it ceases as soon as the base material is clean, eliminating the risk of dissolution or pitting of the base metal.
.

vizag chemical  integral dispersants also ensure that contamination removed from dirty surfaces is held in solution to prevent re-soiling.vizag is a high efficiency, low maintenance industrial cleaning product that is the safe and economical answer to most degreasing problems.

Product Benefits

Removes oil, grease, carbon, rust, scale and paint.
High alkaline powder concentrate effective for a range of surface films
Lifts deposits and disperses them into the solution preventing re-soiling
Process stops as soon as the base material is clean
Eliminates the risk of dissolution or pitting the base metal
Added water softeners ensure no loss of the products power
Effective even in hard water conditions
No harmful or corrosive vapours
Will not attack sound ferrous meals
No specialist equipment required

Application & Dosage Information

Degreasing

A warm solution containing 50g vizag chemical  in a litre of solution rapidly  emulsifies simple films of oils and greases.

Removal of Carbon, Carbonised Oil & PaintConcentrations between 50 g/litre and 200 g/litre heated to 90-100°C should be employed. The tank immersion technique is recommended in order to make maximum use of the heat available.

Agitation of tanks either mechanically or by air stream assists in the breaking up of soils.

Alkaline Derusting

vizag chemical  at a concentration of 200 g/litre is maintained at or near to a rolling boil in a suitable tank, where agitation may be applied either from compressed air or mechanical means.

Rusty parts are immersed contained in basket work trays and allowed to soak for 10 minutes in the case of light flash rusting or for up to 45 minutes for severe corrosion and heat treatment scales.

Important – Neither the powder nor its solutions should be allowed to make contact with aluminium alloys, zinc or zinc-based alloy, tin or its alloys or lead-based materials, since these metals are readily soluble in alkaline solutions.

It is always advisable to carry out a ‘Control Of Substances Hazardous to Health’ (COSHH) assessment before use.