Polytetrafluoroethylene PTFE manufacturers, exporters, and suppliers in India
Vizag chemical is one of the leading Polytetrafluoroethylene PTFE manufacturers, exporters, and suppliers in Visakhapatnam, Mumbai, Surat, Chennai, Ahmedabad, Pune, and Kolkata India. We are supplied to various industrial markets including Household, Institutional Cleaning, Personal Care, and Industrial sectors including Oil fields, chemical, Animal feed additive, Food additive, Agrochemical, Fertilizer, pharmaceuticals, water treatment, Minerals, Lubricants, Marine Industry, Metal Working chemical industry, and Coatings markets.
Polytetrafluoroethylene is a fluorocarbon solid (at room temperature), as it is a high-molecular-weight polymer consisting wholly of carbon and fluorine. PTFE is hydrophobic: neither water nor water-containing substances wet PTFE, as fluorocarbons demonstrate mitigated London dispersion forces due to the high electronegativity of fluorine. PTFE has one of the lowest coefficients of friction of any solid.
Polytetrafluoroethylene is used as a non-stick coating for pans and other cookware. It is non-reactive, partly because of the strength of carbon-fluorine bonds, and so it is often used in containers and pipework for reactive and corrosive chemicals. Where used as a lubricant, PTFE reduces friction, wear, and energy consumption of machinery. It is commonly used as a graft material in surgical interventions. It is also frequently employed as a coating on catheters; this interferes with the ability of bacteria and other infectious agents to adhere to catheters and cause hospital-acquired infections.
Wire insulation, electronics
The major application of PTFE, consuming about 50% of production, is for the insulation of wiring in aerospace and computer applications (e.g. hookup wire, coaxial cables). This application exploits the fact that PTFE has excellent dielectric properties, especially at high radio frequencies, making it suitable for use as an excellent insulator in connector assemblies and cables, and in printed circuit boards used at microwave frequencies. Combined with its high melting temperature, this makes it the material of choice as a high-performance substitute for the weaker and lower-melting-point polyethylene commonly used in low-cost applications.
Bearings Seals
In industrial applications, owing to its low friction, PTFE is used for plain bearings, gears, slide plates, seals, gaskets, bushings, and more applications with sliding action of parts, where it outperforms acetal and nylon.
Electrets
Its extremely high bulk resistivity makes it an ideal material for fabricating long-life electrets, the electrostatic analogs of permanent magnets.
Chemically-inert liners
Because of its extreme non-reactivity and high-temperature rating, PTFE is often used as the liner in hose assemblies, expansion joints, and industrial pipelines, particularly in applications using acids, alkalis, or other chemicals. Its frictionless qualities allow an improved flow of highly viscous liquids, and for use in applications such as brake hoses.
Musical instruments
PTFE is often found in musical instrument lubrication products; most commonly, valve oil.
Lubricants
PTFE is used in some aerosol lubricant sprays, including in micronized and polarized forms. It is notable for its extremely low coefficient of friction, its hydrophobia (which serves to inhibit rust), and for the dry film, it forms after application, which allows it to resist collecting particles that might otherwise form an abrasive paste.
Kitchenware
PTFE is best known for its use in coating non-stick frying pans and other cookware, as it is hydrophobic and possesses fairly high heat resistance.
PTFE tapes with pressure-sensitive adhesive backing
The sole plates of some clothes irons are coated with PTFE.
Others
Other niche applications include:
It is often found in ski bindings as a non-mechanical AFD (anti-friction device).
It can be stretched to contain small pores of varying sizes and is then placed between fabric layers to make a waterproof, breathable fabric in outdoor apparel.
It is used widely as a fabric protector to repel stains on formal schoolwear, like uniform blazers.
It is frequently used as a lubricant to prevent captive insects and other arthropods from escaping.
It is used as a coating for medical and healthcare applications formulated to provide strength and heat resistance to surgical devices and other medical equipment.
It is used as a film interface patch for sports and medical applications, featuring a pressure-sensitive adhesive backing, which is installed in strategic high friction areas of footwear, insoles, ankle-foot orthosis, and other medical devices to prevent and relieve friction-induced blisters, calluses, and foot ulceration.
Expanded PTFE membranes have been used in trials to assist trabeculectomy surgery to treat glaucoma.
Powdered PTFE is used in pyrotechnic compositions as an oxidizer with powdered metals such as aluminum and magnesium. Upon ignition, these mixtures form carbonaceous soot and the corresponding metal fluoride and release large amounts of heat. They are used in infrared decoy flares and as igniters for solid-fuel rocket propellants. Aluminum and PTFE are also used in some thermobaric fuel compositions.
Powdered PTFE is used in a suspension with a low-viscosity, an azeotropic mixture of siloxane ethers to create a lubricant for use in twisty puzzles.
In optical radiometry, sheets of PTFE are used as measuring heads in spectroradiometers and broadband radiometers (e.g., illuminance meters and UV radiometers) due to PTFE's capability to diffuse a transmitting light nearly perfectly. Moreover, optical properties of PTFE stay constant over a wide range of wavelengths, from UV down to near-infrared. In this region, the ratio of its regular transmittance to diffuse transmittance is negligibly small, so light transmitted through a diffuser (PTFE sheet) radiates like Lambert's cosine law. Thus PTFE enables cosinusoidal angular response for a detector measuring the power of optical radiation at a surface, e.g. in solar irradiance measurements.
Teflon-coated bullets are coated with PTFE to reduce wear on the rifling of firearms that uncoated projectiles would cause. PTFE itself does not give a projectile an armor-piercing property.
Its high corrosion resistance makes PTFE useful in laboratory environments, where it is used for lining containers, as a coating for magnetic stirrers, and as tubing for highly corrosive chemicals such as hydrofluoric acid, which will dissolve glass containers. It is used in containers for storing fluoroantimonic acid, a superacid.
PTFE tubes are used in gas-gas heat exchangers in gas cleaning of waste incinerators. Unit power capacity is typically several megawatts.
PTFE is widely used as a thread seal tape in plumbing applications, largely replacing paste thread dope.
PTFE membrane filters are among the most efficient industrial air filters. PTFE-coated filters are often used in dust collection systems to collect particulate matter from air streams in applications involving high temperatures and high particulate loads such as coal-fired power plants, cement production, and steel foundries.
PTFE grafts can be used to bypass stenotic arteries in peripheral vascular disease if a suitable autologous vein graft is not available.
Many bicycle lubricants and greases contain PTFE and are used on chains and other moving parts subjected to frictional forces (such as hub bearings).
EPTFE is used for some types of dental floss.
PTFE can also be used for dental fillings, to isolate the contacts of the anterior tooth so the filling materials will not stick to the adjacent tooth.
PTFE sheets are used in the production of butane hash oil due to their non-stick properties and resistance to non-polar solvents.
PTFE, associated with a slightly textured laminate, makes the plain bearing system of a Dobsonian telescope.
PTFE is widely used as a non-stick coating for food processing equipment dough hoppers, mixing bowls, conveyor systems, rollers, and chutes. PTFE can also be reinforced where abrasion is present – for equipment processing seeded or grainy dough for example.
PTFE has been experimented with for electroless nickel plating.
PTFE tubing is used for Bowden tubing in 3D printers because its low friction allows the extruder stepper motor to push filament through it more easily.
PTFE is commonly used in aftermarket add-on mouse feet for gaming mice to reduce the friction of the mouse against the mouse pad, resulting in a smoother glide.
PTFE foils are commonly used with laser printers everywhere, in their fuser unit, wrapped around the heater element(s) and as well on the opposite pressure roller to prevent any kind of sticking to it (neither the printed paper nor toner waste).
PTFE is also used to make body jewelry as it's much safer to wear compared to materials like acrylic, which releases toxins into the body at 26.6°C, unlike PTFE at 650–700°C.
We are trying our best to supply every chemical you may wish to buy. However, if there is something you can’t find, feel free to contact us and we will find just what you are looking for and offer you a competitive price. For more information or to request a particular product, call customer services or Given website Email address.
Leave a comment