Heavy-Duty Ecological Cleaner for Hydrocarbon Deposits & Hydrocarbon-Free Tank Cleaning

Product Category: Marine Tank Cleaning Chemical
Application: Cargo Tanks, Fuel Tanks, Hydrocarbon Residues & Heavy Mineral Deposits
Form: Liquid Concentrate
Brand: RXSOL – DUBICHEM Marine International

Product Description

RXSOL ECO-SOLVE is a high-performance, environmentally conscious heavy-duty marine cleaning chemical designed for the removal of heavy mineral hydrocarbon deposits, oily residues, grease and persistent hydrocarbon contamination from cargo tanks and associated marine surfaces.

The product is formulated for demanding tank-cleaning operations where conventional general-purpose cleaners may not provide sufficient cleaning power. It is particularly useful when the objective is to achieve a deep, effective and hydrocarbon-free tank surface suitable for subsequent cargo loading.

Very effective cleaner for sticky PU, Gasious,Oily and Greasy mess, Fully active cleaner specially formulated  for the removal of  tuff oily stains residues, with out the need for Scrubbing or Brushing  which can cause mechanical damages to surface and result in poor performance. Field test have shown that this is very gentle with personnel and on metallic colour surface. Should always be used at full strength to obtain maximum benefits.

Same Family PRODUCT :::  www.rxmarine.com/STICKNSOL    ( STICK N SOL , RXSOL-15-1017-025 )

This heavy duty cleaner is a biodegradable degreaser (oil dispersant). It disperse and remove all types of oil, grease, wax, and stains, leaving the treated surface cleansed and back to original condition without any short or long term effects.  And  This cleaner is powerfull substitute of IPA, Methyl Ethyl Ketone , acetone, and other hazardous alcohol and solvents. This product have low evaporation rate and high solvency formula can significantly reduce overall solvent usage. It contains no water and it is 100%  reactive proprietory blend.

Application

Hydrocarbon-Free Tank Cleaning

One of the important applications of RXSOL ECO-SOLVE is preparation of tanks where subsequent cargo requirements demand a high level of cleanliness and minimal hydrocarbon carryover.

The product can form part of a planned tank-cleaning sequence involving pre-cleaning, chemical washing, rinsing and final inspection. The exact cleaning procedure should be selected according to the previous cargo, tank coating, contamination level and next-cargo requirements.

Cleaning Performance

RXSOL ECO-SOLVE is intended for difficult contamination where heavy mineral hydrocarbons have adhered to tank surfaces and ordinary washing is insufficient.

Its cleaning action helps loosen and remove:

• Mineral oil residues

• Heavy hydrocarbon films

• Oily deposits

• Grease

• Persistent tank contamination

• Hydrocarbon-based cargo residues

Technical Specification

Yes. I found the official/public technical data sheet information for Careclean Eco-Solve. There are two public versions, and the later revision gives a dosage range of 0.5–2% for recirculation, while an earlier PDS gives 1–3% for DPP→CPP cleaning and 0.3–1% for hydrocarbon-free cleaning after mineral oil. 

For an RXSOL product page, I recommend using the technical specifications below as a target/comparable specification only, unless your own RXSOL QC/COA confirms these values.

RXSOL ECO-SOLVE

Heavy-Duty Hydrocarbon & Cargo Tank Cleaner

Technical Specifications

*Actual RXSOL values must be confirmed by the applicable RXSOL Technical Data Sheet, batch specification and approval documentation.

Cleaning Performance

RXSOL ECO-SOLVE is designed for difficult mineral-hydrocarbon contamination, including residues associated with:

• Crude and mineral oils

• Coal tar

• Benzene-containing residues

• Lubricating oils

• Petroleum distillates

• Pyrolysis gas oil

• Bitumen

• Heavy hydrocarbon deposits

Recommended Tank Cleaning Parameters

For demanding cargo-tank cleaning, a typical procedure can involve:

Prewash:
Prewash the tank with seawater at approximately 60°C.

Chemical concentration:

• DPP → CPP: 1–3%

• Hydrocarbon-free cleaning after mineral oil: 0.3–1%

Cleaning temperature:
Approximately 60°C

Circulation time:
Approximately 2–4 hours, depending on contamination and tank condition.

Final step:
Flush thoroughly with suitable water and drain the tank.

The public PDS confirms these application ranges and parameters for the source product. 

Important Technical Characteristics

Neutral pH

The referenced product has a reported pH of approximately 7 at 5% dilution in fresh water, making it substantially different from strongly acidic or strongly alkaline tank cleaners. 

High Flash Point

The reported flash point is above 62°C, which is an important characteristic for marine and industrial cleaning operations. 

Emulsifying Action

The product uses an emulsifying cleaning mechanism to assist in loosening and removing heavy hydrocarbon residues and facilitate subsequent flushing.

Heavy-Duty Application

The product is intended for heavily contaminated systems, including cargo tanks and certain industrial equipment. Marine Care also identifies Eco-Solve for rapid cleaning of challenging mineral-oil cargoes. 

Technical Data Summary

RXSOL ECO-SOLVE

Physical State: Liquid
Density: ~1.00 kg/L
pH: ~7.0 @ 5% dilution
Flash Point: >62°C
Cleaning Type: Emulsifying heavy-duty cleaner
Primary Use: Mineral hydrocarbon and cargo-tank cleaning
Typical Recirculation: 0.5–2%
DPP → CPP: 1–3%
HC-Free after Mineral Oil: 0.3–1%
Typical Temperature: ~60°C
Typical Circulation: 2–4 hours

Quality Control

Each batch of RXSOL ECO-SOLVE should be released against the approved RXSOL product specification and applicable Certificate of Analysis (COA). Density, pH, appearance and other critical parameters should be verified by the manufacturer's quality-control department before dispatch.