SURFACE CLEAN GEL
Technical Specifications
Technical Specifications
|
Parameter |
Development Target |
|---|---|
|
Appearance |
Yellow viscous gel |
|
pH |
Below 2 |
|
Specific Gravity at 25°C |
Determine by QC |
|
Wet Film Thickness |
400–500 microns |
|
Theoretical Coverage |
Approximately 2–2.5 m²/L at 400–500 µm |
|
Water Rinsability |
Complete after washing |
|
Flammability |
Assess finished formulation |
|
Shelf Life |
Target 12 months, subject to testing |
The reference product advertises approximately 2–4 m²/L coverage and 12 months' shelf life at 20°C. These are benchmarks, not established specifications for RXSOL.
SPECIFICATION
Appearance: Blue viscous liquid pH(neat):2.0
STORAGE
store & cool, dry place away from direct sun light
SAFETY
Lrritant. Lirritating to eyes and skin. Wear suitable gloves. In case of contact with eyes, wash immediately with plenty of water and seek medical advice. Do not use on acid-sensitive surface. Immediately remove any drops or splashes and rinse with water. Do not mix with bleaches or any other cleaning chemical products.
Application & Dosage
RXSOL Marine Surface Cleaning Gel is a proposed high-performance acidic cleaning gel developed for removing light-to-medium rust, mineral deposits, salt contamination, algae, biofilm and other inorganic deposits from compatible industrial and marine surfaces.
The formulation is intended to cling to vertical and irregular surfaces, increasing chemical contact time and reducing runoff during cleaning.
It is designed for applications involving marine vessels, offshore platforms, industrial equipment, shipyard maintenance and surface preparation before coating.
The reference Valhall Gel is a yellow, acidic surface cleaner with a pH below 2, designed for application by airless spray, brush or roller.
Applications
|
Application |
Purpose |
|---|---|
|
Ship Decks & Gangways |
Removal of rust stains and mineral deposits |
|
Stainless Steel Equipment |
Cleaning surface oxidation and contamination |
|
Marine Cable Trays |
Removal of salt and rust deposits |
|
Fiberglass Surfaces |
Cleaning mineral and environmental deposits |
|
Heat Exchanger Exteriors |
Removal of accessible mineral contamination |
|
Offshore Structures |
Surface maintenance and cleaning |
|
Industrial Equipment |
Cleaning before inspection or maintenance |
Compatibility with each substrate and coating must be confirmed by patch testing.
Avoid use on marble, limestone, natural stone, metallic fittings and other acid-sensitive surfaces.
Critical safety warning: Never mix this acidic cleaner with sodium hypochlorite, bleach or ammonia-containing cleaners. Toxic chlorine or chloramine gases may be released.