Superfoam Drilling Foam Liquid

← Back to all products
Drilling Fluids & Mud Oil Field chemicals-81

Superfoam Drilling Foam Liquid

SKU: RXSOL-81-8206-270
RXSOL DRILLING FOAM RX is a proprietary mixture of biodegradable surfactants and foam stabilizers which is designed to produce high performance foam using fresh, brackish and sea water for various drilling operations.
Pack Size / Specification:
Drilling Foam RXSOL available in 25 Ltr, 50 Ltr, 210 Ltrs and 1000 Ltrs IBC TANK
Enquire About This Product →

Technical Specifications

Parameter Test Method Unit Result
pH @ 25°C (1% Solution) METS IP 81 – 7.36
Determination of Biodegradability METS IP-80 % 90.37
Specific Gravity @ 25°C Measurement – 1.0467
Solubility Visual/Gravimetric – Soluble
Viscosity @ 20°C (Spindle-2, Speed-60 rpm, Torque-74%) Viscometer cP 603
Non-Volatile Content Gravimetry % 10.77
Foam Generation (1% Solution with Fresh Water) Gravimetry/Volumetry mL 530
Foam Stability (1% Solution with Fresh Water) Gravimetry/Volumetry Sec 205
Salt Tolerance (1% Solution with 5% NaCl) - Foam Generation Gravimetry/Volumetry mL 360
Salt Tolerance (1% Solution with 5% NaCl) - Foam Stability Gravimetry/Volumetry Sec 212
Thermal Stability - Foam Generation Gravimetry/Volumetry mL 510
Thermal Stability - Foam Stability Gravimetry/Volumetry Sec 170

Heavy Metal Test Report of Superfoam Drilling Foam Liquid

Parameter Test Method Unit Result
Lead (Pb) METS IP 76 ppm ND
Arsenic (As) METS IP 76 ppm ND
Cadmium (Cd) METS IP 76 ppm ND
Mercury (Hg) METS IP 76 ppm ND
Antimony (Sb) METS IP 76 ppm ND

ND: Not Detected

Application & Dosage

SUPERFOAM DRILLING FOAM RXSOL  may be used in a variety of drilling operations. Oil Well Drilling, ranging from simple air drilling to stiff foam drilling where the foam is reinforced by the use of polymers.

Superfoam Drilling foam FOAM PLUS is a upgraded concentrated premium anionic surfactants which has been formulated for use in the oil & gas, mineral and water well drilling engineering.

 

SUPERFOAM DRILLING FOAM by RXSOL is one of the most superior foaming agents with special polymer base additives which not only help in stabilizing foams but also enhance the lubricity during drilling operations in the fields.

DRILLING FOAM RXSOL  concentration may vary depending on the specific drilling system and equipment used. However for air drilling, drill foam can be used as an effective dust suppressant, at 0.1 - 0.2% by volume in injection water. For normal drilling condition, foam can be used as 0.5-1% by volume in injection water.

DRILLING FOAM RXSOL can be mixed in water tank and introduced into the airstream. A foam injection pump with nozzle can be used. The foam drill concentration may vary depending on the specific drilling system and equipment used. Use water as clean as possible to mix to prevent fines and dirt from damaging or blocking suction-line filters of the small parts and passages of the foam pump.

SuperFoam Drilling Foam for Oil and Gas Recommended Treatment:

Mix slowly through a jet mixer or sift slowly into the vortex of a high-speed stirrer.

  • Air drilling: 0.1-0.2%
  • Mist Drilling: 1.0%-2.0%
  • Stiff foam drilling: Mix Drilling Foam, 0.1-0.2% as foam stabilizer or 0.2-0.4%, Drilling Foam Foam Plus 1.0-1.5%

Related Information