Sodium Thiosulfate Pentahydrate

← Back to all products
Powder Chemical-98

Sodium Thiosulfate Pentahydrate

SKU: RXSOL-19-2031-050
Sodium Thiosulfate used as a Pond / Aquarium Dechlorinator. This product also used as a Photography as a fixing agent (hypo) to dissolve unchanged silver salts from exposed negatives.
Pack Size / Specification:
Powder form can be customized in 250, 500 Gram to 1, 5, 10, 20, 50 Kg Available in Kandla, Mundra, Mumbai, Manglore, Chennai, Visakhapatnam, Kolkata, Fujairah, Dubai - Middle East
Enquire About This Product →

Application & Dosage

Typical Applications

Sodium Thiosulfate Anhydrous can be used for:

  • Ballast water dechlorination

  • Residual chlorine neutralization

  • Electrochlorination BWMS

  • Sodium hypochlorite-treated ballast water

  • Oxidizing biocide neutralization

  • Ballast water discharge preparation

  • Marine water-treatment systems

How Sodium Thiosulfate Works

Sodium thiosulfate functions as a reducing agent. It reacts with residual oxidizing species and converts them into less oxidizing chemical species.

In a chlorine-treated ballast water system, sodium thiosulfate can consume residual chlorine, helping reduce the Total Residual Oxidant (TRO) concentration before discharge.

The required dosage depends on:

  • Initial TRO concentration

  • Ballast water volume

  • BWMS technology

  • Water chemistry

  • Required discharge residual

  • Chemical concentration

  • Reaction/contact time

  • Dosing-system configuration

Therefore, dosing should be calculated based on the actual BWMS operating parameters rather than using a universal fixed dosage.

Important Dosing Consideration

 

The required quantity of Sodium Thiosulfate should be determined from the actual TRO measurement and BWMS dosing requirements. Overdosing or underdosing can affect ballast-water treatment performance and discharge conditions.

For shipboard operation, dosing should therefore be controlled through the vessel's approved BWMS procedures, TRO monitoring system, and chemical-dosing equipment.

Sodium Thiosulfate for Ballast Water Neutralization

Many Ballast Water Management Systems (BWMS) use an oxidizing treatment process to control organisms in ballast water. Depending on the technology, treatment may generate or introduce free chlorine, hypochlorite, or other oxidizing residuals.

Before discharge, residual oxidant may need to be neutralized.

Sodium Thiosulfate Anhydrous can be dosed into the treated ballast water to reduce residual oxidizing compounds.

This makes it an important chemical for selected ballast-water neutralization systems.

Related Information