Salt Remover Passivation Liq

← Back to all products
Degreaser-10

Salt Remover Passivation Liq

SKU: RXSOL-10-1011-025
Liquid Soluble Salt Remover targets and removes liquid soluble salts such as chlorides, nitrates, and sulfates
Pack Size / Specification:
250 Ml, 1 Ltr ,5, 10, 25, 35, 210 Ltr Chemical cleaning of rust is a wise decision, as this is not only cleaning rust but also chemically neutralizing rusted metal surface to restrict further rusting. Factory sale of Metal clean Britee helps to save up to 50 percent on market price. This is classified RUST & SCALE REMOVER, DETERGENT TYPE.
Enquire About This Product →

Technical Specifications

PRODUCT PROPERTIES :  

APPEARANCE Clear Liquid  
DENSITY g/cm3 at 15°C: 1.2  
pH  2.5-3.5  Buffer Action of materials makes it different from other BRAND. 
COMPATIBILITY    
METAL Suitable for M.S and S.S metal  
RUBBER No known effect  
PACKAGING Order No.  RXSOL-20-1011-210 Size (in litres)  25 , 35 , 210
 
 
* Shelf Life: 60 months
* pH 3.4 (+/- .2)
* Application temperature: +32 °F
* Packaging: 1/5/55 US gallons

Application & Dosage

SURFACE PREPARATION: Best surface preparation yields the best results. If hydrocarbons are present, they should be removed prior to salt removal. Barrier materials, such as rust or scale or delaminated coatings, should be removed prior to salt removal. Sufficient mechanical force may be utilized so barrier materials are removed as part of salt removal procedures.
 
Where to use Salt Remover?
  • Marine and offshore equipment exposed to seawater
  • Ship decks, pipelines, and engine room components
  • Heat exchangers and condensers
  • Storage tanks and metal surfaces before painting/coating
  • Industrial machinery affected by salt deposition
  • Desalination plants and coastal installations

RECOMMENDATION : Ready to use direct from the container- Single Component Product no dilution necessary.

FIELD:-  Typical Coverage: 300 square feet per gallon
 

Before and after cleaning a small sample area, test the surface for contamination. Rewash as necessary and retest to assure desired cleanliness is achieved. It is not necessary to use the entire contents. Partially filled containers should be tightly closed.


specially designed for Soluble Salt Remover is a pre-mixed, Direct-To-Surface solution to ensure a salt-free surface prior to coating..

Procedure for Use :- is an organic bonding chemical blend which aids in the removal of chlorides, sulfates and nitrates and most other soluble salts.

  • RXSOL-10-1011-025 is highly concentrate
  • Always use directly on surface
  • The surface should be sound clean and free of oil, grease, dirt etc.
  • Apply on the rusted / salted area for 15 to 20 minutes For stubborn hevy deposits.

Related Information