Primary tabs
RXSOL RX 1
RXSOL RX 1 is also popularly known as Bathroom Cleaner and Sanitiser/ Urinary Bowel and Toilet Cleaner. "R" stands for "Room Care" and is widely used in Hotels and many others areaas where cleaning is required. RXSOL RX 1 is a specially formulated chemical which is used for cleaning Bathrooms and Toilets specially in Hotels. RXSOL R1 for Hotels and Homes is such a characteristic pleasant fragrance which creates a fresh and soothing environment without any bad odors.This chemical liquid is used to clean and sanitize all the bathroom equipments, floors/tiles, bath tubs, toilet seats and other surfaces. RXSOL R1 is one of the most effective chemicals which does not require any external force or pressure and just after applying the chemical liquid of RXSOL R1, wipe the surface or scrub it only if needed.
R1 is a unique chemical which has been approved and liked by many of our customers. Not only because of RXSOL R1/ Bathroom Cleaner effectiveness but also for our cost-effective/ economical rates, our customers are always connected with us.
KEY FEATURES OF RXSOL R1/ BATHROOM CLEANER:
- Citric acid-based formulation
- Ideal viscosity for excellent adhesion
- Pleasant, fresh Room Care fragrance
BENEFITS OF RXSOL R1:
- Appropriate for daily use
- Effectively removes stains and deposits from toilet bowls and urinals
- Regular use hinders lime scale build-up
- Extended contact time on vertical/sloped surfaces for optimum cleaning efficacy
- Angled neck squeezable bottle for fast and easy application
- Colour and alphanumeric codes to prevent application mistakes
REGARDING THE APPLICATION OF RXSOL R1/ BATHROOM CLEANER FOLLOW THESE 3 SIMPLE AND EASY STEPS :
- Spray directly on the surface to be cleaned
-
Leave for 2 to 5 seconds for the chemical to do its work
-
Scrub if necessary and wipe the surface with a clean and dry cloth
HOW TO USE RXSOL R1 ON URINALS AND TOILET SEATS :
- Flush the toilet bowl or urinal.
- Gently squeeze the RXSOL RX 1 bottle to direct product under the rim, around the bowl and onto water/flush paths.
- Allow at least 10 minutes contact time.
- Use a brush or sponge pad to remove difficult stains.
- Then flush to rinse.
Important note on RXSOL RX 1: Do not use on acid-sensitive surfaces, e.g. enamel, marble, grouting.Immediately remove any drops or splashes from acid-sensitive surfaces and rinse with water. Do not mix with bleach or other cleaning products. Test material compatibility in a small, inconspicuous place before use.
How to Dilute:
- For cleaning: 20 ml in 1 ltr. water
- For sanitizing: 50 ml in 1 ltr. water
Benefits
- Appropriate for daily use
- Effectively removes stains and deposits from toilet bowls and urinals
- Regular use hinders lime scale build-up
- Extended contact time on vertical/sloped surfaces for optimum cleaning efficacy
- Angled neck squeezable bottle for fast and easy application
- Colour and alphanumeric codes to prevent application mistakes
TECHNICAL SPECIFICATION OF RXSOL RX R1
• Appearance: clear, dark blue liquid
• Relative density [20°C]: 1.136
• pH-value neat: 1.0 - 1.5
• pH-value in use: 3.0 +/- 0.5 at 10% dilution
Safe handling and storage information Safe handling: Full guidance on the handling and disposal of this product is provided in a separate Material Safety Data Sheet. Only for professional users / specialists.
The above data is typical of normal production and should not be taken as a specification.
Use instructions
Dosage: The product is ready to use; apply undiluted.
Application: Flush the toilet bowl or urinal. Gently squeeze the RXSOL RX 1 bottle to direct product under the rim, around the bowl and onto water/flush paths. Allow at least 10 minutes contact time, use a brush or sponge pad to remove difficult stains, then flush to rinse.