Primary tabs
RO Membrane Clean LOW pH
Low pH cleaner formulated to remove severe calcium carbonate scaling and moderate metal fouling and metal-organic Complexs
REVERSE OSMOSIS MEMBRANE CLEANER : low pH cleaner formulated to remove severe calcium carbonate scaling and moderate metal fouling and metal-organic Complexs
RO membrane cleaners is specifically designed to remove iron fouling for silica. It also has effectiveness against calcium carbonate scaling. RXSOL-33-3304-025 performance can be enhanced by adding low / high ph cleaners to the cleaning solution although some minor ph correction may be necessary. It should always be used as recommended by the membrane manufacturer or equipment supplier, in respect to cleaning ph and temperature. it also contains organic dispersants that helps to break down colloidal clay deposits and imparts better efficacy to biocides by penetrating into films. it is specifically developed for removing iron, silica, metal silicates, metal oxides/hydroxides and other colloidal/particulate based foulants from ro membranes. It is also effective to remove calcium carbonate, calcium phosphate and silt.
As RXSOL-33-3304-100 is buffered, the cleaning solution will stabilise at pH 3.6.
High level of active substance.
Other Grades of Membrane cleaner :::
RXSOL-33-3322-025
RXSOL-33-3324-025
MSDS, Technical bulletine of MSDS are available on email request.
Treatment and Dosage Requirements
Cleaning solutions should be prepared with chlorine free product water to give a 4% w/w solution, or 1 kg of RXSOL-33-3304-025 to every 25kgs of water. As RXSOL-33-3304-025 is buffered the cleaning solution will stabilize at pH 3.6.
Deposition of fouling and scale directly affect the cleaning time In general practice to dissolve complete fouling 2 to 3 hours required . During chemical reaction between solution and deposition If the cleaning solution becomes brown to red in color it must be changed as the solution becomes completely non reactive.
On completion of cleaning process membrane should be clean with cupious amount of FRESH WATER till neutralisation of pH value of runing water.
For disposal of RXSOL-33-3304-025 cleaning solution should always be neutralized with alkali.
Liquid product for ease of use
Highly concentrated
Buffered to ensure pH control
Pl. refer our Technical Bulletine and MSDS of Product.
This advanced, high strength formulation available in powder / liquid form
• pH adjusted to 3.0+ 0.5
• Highly effective at ambient temperatures
• Contains no surfactants and is quickly rinsed away
• Contains organic acids, detergent builders and chelating agents
Safety Goggles, And Hand Gloves is compoulsery before using this product. And for more details pl. ask MSDS.
Membrane Cleaner RXSOL- 3304 MC3 is a low pH formulation that has been designed specifically to remove metal hydroxides, calcium carbonate and other similar scales from polyamide, polysulfone and thin film, composite membrane surfaces.