RO Chlorine Neutralizer
Technical Specifications
Technical Specifications
| Parameter | Proposed Description |
|---|---|
| Appearance | Clear liquid |
| Chemical Nature | Reducing agent |
| Active Chemistry | Sodium bisulfite-based |
| Water Solubility | Water-miscible |
| Application | Residual chlorine removal |
| Dosage Method | Continuous metering |
| Recommended Injection | RO feedwater pretreatment line |
| Density | To be established |
| pH | To be established |
| Shelf Life | Subject to stability testing |
| Packaging | Proposed 20 kg, 30 kg and 220 kg |
These are development specifications.
Application & Dosage
Major Applications
1. Reverse Osmosis Membrane Protection
Used to neutralize residual chlorine before water enters polyamide RO membrane systems.
2. Industrial RO Plants
Suitable for chemical pretreatment systems in industrial water purification plants.
3. Seawater Desalination Plants
Can be used in suitable seawater RO pretreatment systems where chlorine is applied upstream and must be removed before membrane contact.
4. Brackish Water RO Systems
Used for dechlorination of municipal, groundwater or surface-water feeds that have undergone chlorination.
5. Boiler Feedwater RO Systems
Helps protect RO membranes used to prepare high-quality water for boiler feedwater treatment.
6. Pharmaceutical and Process Water Systems
Can be evaluated for appropriately controlled industrial and high-purity water treatment systems, subject to application-specific chemical quality requirements.
Recommended Dosage
The RXSOL-33-9735-025 RXSOL RO Dechlorination Chemical reference document indicates approximately 9 ppm of product for removal of 1 ppm of residual chlorine.
This figure may be used as a reference benchmark for RXSOL product development. The final RXSOL dosage must be determined from the actual active concentration and dechlorination performance.
| Residual Chlorine in RO Feedwater | Reference Product Dosage |
|---|---|
| 0.2 ppm | 1.8 ppm |
| 0.5 ppm | 4.5 ppm |
| 1.0 ppm | 9.0 ppm |
| 1.5 ppm | 13.5 ppm |
| 2.0 ppm | 18.0 ppm |
The above values are proportional calculations based on the GENERAL APPLICATION.
Application Procedure
-
Measure residual free chlorine in RO feedwater.
-
Determine the required dechlorination chemical dosage based on active content and water conditions.
-
Install a suitable chemical metering pump and injection arrangement.
-
Inject the chemical into the RO feedwater line at a location that provides sufficient mixing and reaction time.
-
Monitor residual chlorine downstream of chemical injection.
-
Confirm chlorine removal before water enters chlorine-sensitive RO membranes.
-
Adjust the dosage according to feedwater chlorine variation and operating conditions.