Suitable to empty ballast tanks,bilge wells,etc.in emergency cases often used for draining cargo and after the washing procedure.especially preferred where an electric spark may risk ignition or explosion .air pressure is 0.59MPa(6kgf/cm2)

Application

Technical Specification

STORAGE:

When storing a sump pump for any length of time precautions should be taken to prevent corrosion and to maintain the pump in a serviceable condition.

• Remove discharge and exhaust hose or pipe and run a pump out of water to blow out all moisture.

• Remove the air line and pour a small amount of rust resistant oil in the live air inlet, re-connect hose and idle motor for a few minutes to carry oil to all internal parts.

• Remove air hose and plug air inlet and air exhaust post with corks.

• Wipe out the pump with rust resisting oil. Wrap pump in oiled paper and pack in covered box.

• Store pump in dry place.

•