Primary tabs
Oil Spill Dispersant Type-III 210 Ltrs
It is a bio-degradable low toxic product with excellent efficiency of oil dispersant nature . This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.
RXSOL-17-1047-210 Emulsifier based product with excellence efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place .
AREA: At SEA , at shore either in port or off board , for industrial purpose.
Procedure Of Use:-
Oil-Spills-at-Sea
RXSOL-17-1047-210 is used concentrated by direct spraying to clean up oil spills at sea . It can be applied by hand spray, work boats with mounted spray booms , or fire hoses with injectors. Allow some time for the oil to absorb the RXSOL-17-1012-SB and then disperse mixture by vigorous agitation using Fire hoses , Ship's propeller, Breaker boards towed behind work boats , etc .
Oil - On - Beaches - And - Shore - Line
RXSOL-17-1012-SB should be applied neat by spraying over oiled areas. Allow time for the oil to absorb the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment rate depends on the nature and thickness of the oil spill, also on the age and condition. Under conditions where it is a thin slick of oil, 1 litre of RXSOL-17-1047-210 is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications may be necessary. (Depends on the size of contamination in the affected area )
Oil Spill On Deck
Remove as much of the oil as possible, then spray RXSOL-17-1047-210 over area covered by the oil & allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.
Oil spills at sea, harbours, beaches, or on land. Can also be used in industries.
- Floating oil on harbours, coastal water and inland waterways.
- Oil spills on ship decks, docks, piers beaches and land.
- Oil accumulation on pilings and dock support structures.
- Thoroughly wet the oil by spraying OIL SPILL DISPERSANT Type III through a pressure device.Keep the spray moving in a progressive pattern so as to avoid washing the product.
- Allow the OIL SPILL DISPERSANT to combine with the oil for 15 to 30 minutes.
- Then emulsify the mixture by agitating it with a fire jet spray of salt or fresh cold water. On water the propeller action of a launch is also effective for agitating the mixture. (Agitation is most important for efficient usage).
1 liter of RXSOL-17-1047-210 is enough to treat approx 20-30 sq meters of dispersed oil .
|
Appearance |
Amber liquid / Low viscous |
|
|
Odor |
Sweet |
|
|
Density |
In g/cm3 at 15°C: 1.00 |
NOTE : SHELF LIFE 5 YEARS |
|
Flash Point |
MATERIALS BOILS AT 68°C |
EFFICIENCY : |
|
Compatibility |
|
A . SEA WATER 68% |
|
Metal |
No known effect |
B. FRESH WATER 78% |
|
Rubber |
AVOID |
STABILITY : |
|
Synthetic rubber |
May swell |
A . SEA WATER 97.5 % |
|
pH |
7 +0.5 |
B . FRESH WATER 98.8 % |
|
Packaging |
Order No.: |
Size (in litres) |
|
|
RXSOL-17-1012-SB |
25 , 30 , 210 |
|
|
|
|
Biodegradable and having low toxicity . Self –life 5 YEARS( from mfr. date ) .
HIGH – Emulsification rate Converts hydrocarbons particle in to very fine emulsions.Ready to use product. Suitable for Crude / Bitumen / Residual / Diesel / Kerosene, White spirit & Lube oils etc .Effective on oil spills at platefoprm , during loading or discharging of cargo or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed .