Mould Lubrication Oil

← Back to all products
Drilling Fluids & Mud Oil Field chemicals-81

Mould Lubrication Oil

SKU: RXSOL-81-1020-210
Penetrating Oil A very strong cleaner, which can be used to soften up / remove baked on drying oils and Hard coke asphaltic deposition etc. It is low toxic product with an exceptional solvency power on soil & oily matter . It is minimizes the extre
Enquire About This Product →

Technical Specifications

Parameter

Specification

Test Method

Appearance

Clear, homogeneous liquid

Visual

Colour

Pale yellow to amber

Visual

Odour

Mild petroleum odour

Organoleptic

Density @ 15°C

0.850-0.890 g/cm³

ASTM D4052

Specific Gravity @ 15°C

0.850-0.890

ASTM D4052

Solubility in Water

Insoluble

Visual

Corrosive Properties

Non-corrosive under normal application conditions

ASTM D130

Application & Dosage

Areas of Application

  • Industrial mould lubrication.
  • Concrete moulds and formwork applications, subject to substrate compatibility.
  • Precast concrete moulds.
  • Cement product manufacturing.
  • Industrial casting and moulding operations.
  • Mould surfaces requiring lubrication and release assistance

How to use Mould Lubrication Oil?

Step 1 - Surface Preparation

  • Ensure the mould surface is clean and free from concrete deposits, dust, rust and other contaminants.
  • Remove any residual hardened material before applying the lubricant.

Step 2 - Application

  • Apply RXSOL Mould Lubrication Oil directly onto the mould surface using a spray gun, brush, roller or clean cloth.
  • Spread evenly to form a thin, continuous lubricating film.
  • Avoid excessive application and accumulation of oil in corners or depressions.

Step 3 - Moulding Operation

  • Allow the applied film to distribute uniformly over the mould surface.
  • Proceed with the moulding or casting operation as per the production process.
  • Ensure that excess oil is removed before introducing the moulding material.

Step 4 - Maintenance

  • Clean the mould after each production cycle, where necessary.
  • Reapply the lubricant before the next moulding operation.

Related Information