METHYL RED SODIUM SALT ACS GRADE

← Back to all products
Stains Indicator Reagents-69

METHYL RED SODIUM SALT ACS GRADE

SKU: RXSOL-69-8451-030
pH indicator or indicator dye. It works by turning Red for pH levels under 4.4 and Yellow over 6.2
Enquire About This Product →

Technical Specifications

C.A.S. No. 845-10-3
CI NO. 13020
M.F. C15H14N3O2Na
M.W. 291.29gm/mole

Specifications:

Dye Content (by Spectrophotometry) >90%
Solubility 0.1%(Dist. water) Clear solution
Transition Range pH 4.5-6.2
  Violet red- Brownish Yellow
Absorption maximum (Dist. water) ?max 430-440nm
Absorptivity (A1%/1cm in Dist. water) at ?max >580
Loss On Drying (110°C) 5%

Standard Technical Specifications

Parameter

Typical Description

Chemical Name

Methyl Red Sodium Salt

CAS Number

845-10-3

Molecular Formula

C₁₅H₁₄N₃NaO₂

Molecular Weight

291.28 g/mol

Appearance

Dark red to reddish-brown powder

Chemical Class

Azo Dye

Solubility

Soluble in water

Indicator Transition Range

pH 4.4–6.2

Colour in Acidic Solution

Red

Colour in Alkaline Solution

Yellow

Primary Use

Acid-base indicator

Storage

Tightly closed container, protected from moisture and excessive heat

These are typical reference properties. Final RXSOL specifications, assay and packaging should be confirmed from the applicable batch COA.

Application & Dosage

Typical Quality Control Parameters

Test

Reference Criterion

Appearance

Orange to Brown powder

Identity

Conforms to reference standard

Solubility

Clear 0.1% aqueous solution

Visual Transition

Approximately pH 4.2–6.2

Loss on Drying

Maximum 5%, for selected reagent grades

Dye Content

Grade-specific

Packaging

Laboratory reagent bottles

These are reference criteria from commercial reagent specifications, not certified RXSOL results.

Preparation of 0.1% Methyl Red Sodium Salt Indicator Solution

For a general laboratory stock solution:

Ingredient

Quantity

Methyl Red Sodium Salt

0.10 g

Distilled or Deionized Water

Make up to 100 mL

Preparation: Dissolve the weighed powder in approximately 80 mL of distilled water, mix until dissolved, then make up to 100 mL. Label the solution and verify its colour response against appropriate pH buffers before use.

This is a general 0.1% w/v aqueous preparation. Use the concentration, solvent and storage period specified by the applicable analytical method.

Related Information