Marine Growth Cleaner
Marine Growth remover available in 5, 25, 210 Ltr Drum
Technical Specifications
Physical Proeprties :
| Appearance | : Clear or slightly Turbid aqueous solution, colorless or slightly yellow in color |
| Density (kg / m 3 ) | :1170 |
| pH | : Acidic |
| Flash Point | : None |
| Freezing Point | : + 2 0 C |
| Solubility in Water |
: Cpmpletely soluble in water |
Application & Dosage
RXSOL-25-4038-025 marine growth cleaner Antifouling Liquid ensures the cleanliness of the heat exchange equipment, by dispersing the sediments and deposits of dissimilar substances falling into the system of water supply from the environment, such as sludges, sand, oil products, clays. The Rxsol Antifouling Liquid the removal from the water supply system of dead organic materials, of natural origin, and enhances the action of microbiocides (oxidizing and non-oxidizing). Rxsol Antifouling Liquid is a weakly foaming compound and has a thermal stability, even at high temperatures (+ 120 0 C).
Rxsol Antifouling Liquid reduces the risk of Legionella Pneumophilla bacteria by effectively removing biofilms in the water supply system. When used in sterilizers and autoclaves, the reagent provides clean and shiny surfaces near the loaded glass containers, by emulsifying fats, oils, proteins and other organic residues.
- A/C & Refrigeration cooling Systems
- Engines Seawater Cooling Systems
- Heat Exchangers
- Bow Thrusters
- Water Makers
- Sea Strainers
- Propellers
- Seacocks
- Pumps
- Piping
- Hulls
- Circulate product through the system using a pump.
- Allow it to run for 2–6 hours depending on the severity of fouling.
- Flush system with clean water after treatment.
- Repeat as necessary for heavily fouled systems.
RXSOL Antifouling Liquid may be supplied, directly from the product tank, or as an aqueous solution, to any suitable point in the water supply system. The exact dosage of Rxsol Antifouling Liquid will depend on a number of factors, such as the nature and concentration of suspended solids in the water, and the already existing degree of contamination of the internal surfaces. Preventive control of the technical state of the water supply system can be provided by dosing the reagent in the range 25-100 mg / l in continuous mode, or in a batch mode by the impact method. In water systems that are seriously polluted, the reagent should be cleaned in a concentration range of 1000 to 5000 mg / l. To receive special recommendations, customers should contact the official representatives of Rx Marine International .
A suitable option, for specific heat exchange equipment, can be the equipment of local reagent injection points on incoming pipelines.