Lime Scale Remover
Lime Scale remover packing 5, 10, 25, 50, 210 Ltr
Technical Specifications
Formic acid is also used in place of mineral acids for various cleaning products such as limescale remover and toilet bowl cleaner.
Application & Dosage
The correct quantities of RXSOL-11-1052-025 requirement for descaling will depend upon the character and thickness of scale deposits. For regular de-scaling of dish washing machines prepare a 2 – 4% solution with cold water, and fill the tank just below the overflow level, heat the mixture and allow to run machine until lime scale deposits disappear. Apply full strength to highly contaminated areas where spray does not reach. Drain the tank and fill with cold water and run the machine for 5 minutes and flush with water until the outlet water shows neutral pH. Good results are obtained when descaling is done at 60 Deg. C.
Dip tank method can be used for brightening aluminum, stainless steel equipments and utensils. Prepare a 3 – 5% solution of RXSOL-11-1052-025 with water and soak the utensils for a while to obtain a bright surface. Wash thoroughly with cold water and rinse dry.
Kettle De scalling procedure :::
Use instructions
1. Fill 3/4 parts of kettle with water and makes it boil fully , then disconnect heating procedure before going to 2nd step.
2. Add amount of RX 8 and leave to work. ( doses can vary on deposition of scale, For general and routine cleaning add 3 - 5% )
3. After cleaning effect flush / wash with fresh water.
4. Extra cleaning can be repeated with once more Boil water without addition of RX8 and pour away before using again.