Primary tabs
Ice Machine Cleaner and Sanitizer
Nickel Safe Ice Machine Cleaner is Suitable to clean deposits of black mildew by killing bacteria & spores as well as mineral scale deposits.
RXSOL Ice machine cleaner Formulated from nickel-safe ingredients. Nickel-Safe Ice Machine Cleaner is a specially formulated. citric/phosphoric product for removing scale deposits from ice makers having nickel-plated or tin-plated evaporators. Always follow the procedure and solution concentrations for your model when cleaning and sanitizing. The specific details are on the ice machine front panel label and in your models Installation, Use and Care Manual.
Suitable to clean deposits of black mildew by killing bacteria & spores as well as mineral scale deposits. RXSOL Ice Machine Cleaner helps for reducing the incidence of unpleasant black mildew by killing bacteria & spores, the usual source of this problem.
Cleaning Procedure of Ice Machine Cleaner to remove Scale and deposits of black mildew by killing bacteria & spores...
Professionals Directions of USE:
Replace cleaned components and turn on water.
Drain cleaning solution and flush with fresh water for a minimum of 30 seconds. After flushing, plug the drain. Thoroughly rinse bin with clean water after all components are cleaned.
| Appreance | : | Clear Liquid |
| Odour | : | Neutral |
| pH | : | <1.0 |
| Soecific Gravity | : | More than 1 |
| Viscocity | : | 25 cps |
| Boiling Point | : | 108 °C |
| Flash Point | : | Not Applicable |
| Solubility in Water | : |
100 % in any ratio |
1st for Ice Maker Component Cleaning: Dip BATH process.
Takes 100 ml of RXSOL Ice Machine Cleaner for 3 Ltr of warm water in plastic container and immerse components in solution. Soak the components until they are free of deposits; for stubborn or thick deposits use a soft brush to help the dissolving action
2nd for Circulation system Cleaning: Recirculation Method.
Use 100 to 150 ml of RXSOL Ice Machine Cleaner in 3 Ltr water in the machine. Allow cleaning solution to circulate for up to 10-20 minutes; it may be necessary to recirculate the solution for longer than 10 minutes to remove heavier and thicker scale deposits. Be sure all distribution and weep holes are clear.
How Scale formed in Ice Maker Machine?
Dissolved Mineral or presence of mineral present in water is cause of SCALE FORMATION in ICE MAKER. Water tries to freeze in its pure state, while mineral present in water getting precipitate. As the cycle continues and more water is made into ice, the minerals over concentrate and eventually precipitate as a lime scale deposit.
Why Regular Cleaning of SCALE is essential from Ice Maker?