HVAC CHILLER DESCALING CHEMICAL

← Back to all products
RXSOL product image coming soon
Request a Quote Email usvizagchemical @ gmail.com DocumentsRequest MSDS / TDS
Scale Remover-11

HVAC CHILLER DESCALING CHEMICAL

SKU: RXSOL-11-8865-025
High Performance Scale Remover for HVAC Chillers, Heat Exchangers, Condensers and Cooling Water Systems
Enquire About This Product →

Technical Specifications

Descaling Chemical compound Should have following Properties

Odour

Characteristic smell

Appearance

Viscous Liquid, soluble in water

pH (Neat)   

  2.0 at 100 % concentration

Boiling point

~ 100 °C at 760 mm /Hg

Vapour pressure

105.5 at 20 deg C

Specific gravity (water=1)

1.20±0.05

Freezing point~

30 °C at 760 mm/Hg

Solubility with water at 20 degree C

    100%
Flammable Non combustible 

Application & Dosage

What Causes Scale in Chiller & Condenser Tubes?

Central AC plants often operate with continuous water circulation. Depending on water chemistry, minerals such as calcium carbonate, calcium sulfate, magnesium deposits, silica, iron oxides, and other contaminants can accumulate on heat-transfer surfaces.

The problem can become more severe when:

  • Hard water is used

  • Cooling-water treatment is inadequate

  • Water circulation is poor

  • Blowdown is insufficient

  • pH and alkalinity are not properly controlled

  • Equipment operates continuously for long periods

The resulting deposits form an insulating layer over heat-transfer surfaces.

RXSOL-41-8865-025 contains a powerful dissolving agent for various mineral compounds. Early stage uses of  RXSOL-41-8865-025 prohibit scales build up which results in tube blockage, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

* Calcium sulfate is easier to be formed when the temperature goes higher.

The most effective method of RXSOL-41-8865-025 is circulation for large systems or components. In the case of small components, the soak method in an immersion bath can be used.

If the equipment to be cleaned is contaminated by oil, grease, sludge or carbonised oil, then pre-cleaning with RXSOL-20-2002-SC or Rxsol-10-1006 is necessary.
 

Why Chiller Descaling is Important

Scale acts as a thermal barrier between the circulating water and the metal surface. Even a relatively thin deposit can reduce heat-transfer efficiency.

Regular inspection and appropriate chemical cleaning can help:

  • Restore heat-transfer efficiency

  • Improve condenser performance

  • Reduce energy consumption

  • Improve chilled-water system operation

  • Remove mineral deposits

  • Improve water circulation

  • Reduce maintenance problems

  • Extend equipment service life

Related Information

Applications of Descaling Chemical

A suitable descaling chemical compound can be used for cleaning various components of central AC and HVAC systems, subject to material compatibility.

1. Chiller Heat Exchangers

Chemical descaling can help remove mineral deposits from heat-transfer surfaces inside compatible chiller heat exchangers.

2. Condenser Tubes

Condenser tube descaling is one of the most important applications. Deposits inside condenser tubes can restrict water flow and reduce heat transfer between the refrigerant system and cooling water.

3. Central AC Plants

Large central air-conditioning systems can develop scale and deposits in cooling-water circuits over time. Periodic chemical cleaning can help maintain system efficiency.

4. Cooling Water Circuits

Descaling chemicals may also be used in selected cooling-water equipment, heat exchangers, pipelines, and associated components.

How Does Chiller Descaling Chemical Work?

Most descaling formulations use an acidic or specialty chelating chemistry capable of dissolving mineral deposits. The chemical reacts with deposits such as carbonate scale and converts them into soluble compounds that can be removed during circulation and flushing.

The choice of chemistry depends on:

  • Type of scale

  • Thickness of deposits

  • Equipment metallurgy

  • Presence of copper, brass, steel, stainless steel, or other materials

  • System temperature

  • Cleaning time

  • Required cleaning strength

  • Environmental and discharge requirements

For this reason, the strongest acid is not necessarily the best descaling chemical. A properly formulated product should balance deposit removal with material compatibility and corrosion control.

Descaling Condenser Tubes in Central AC Plants

A typical chemical-cleaning procedure involves isolating the equipment, circulating the appropriate diluted descaling solution through the affected circuit, monitoring the cleaning process, and subsequently flushing the system thoroughly with clean water.

Before chemical cleaning:

  1. Identify the type of scale.

  2. Confirm the metallurgy of the condenser/chiller.

  3. Isolate the equipment safely.

  4. Inspect the system and establish the required cleaning method.

  5. Prepare the descaling solution according to the manufacturer's instructions.

  6. Circulate the solution for the recommended period.

  7. Monitor pH and cleaning progress where appropriate.

  8. Drain the spent solution safely.

  9. Thoroughly rinse and neutralize the system as required.

  10. Return the equipment to service after confirming acceptable conditions.

Dosage, concentration, circulation time, and neutralization requirements should always be based on the specific chemical manufacturer's technical instructions.

Advantages of a Quality Chiller Descaler

A properly formulated descaling compound can offer:

  • Effective removal of carbonate scale

  • Removal of mineral deposits

  • Improved heat transfer

  • Better condenser efficiency

  • Improved water flow

  • Reduced maintenance requirements

  • Faster cleaning compared with mechanical methods in suitable applications

  • Corrosion-inhibited cleaning when the formulation is designed for the equipment

  • Application flexibility for HVAC and industrial heat exchangers

Descaling Chemical Compound for Chiller, Condenser tube of Central AC Plant manufacturer and supplier in INDIA and Middle East. We have stock point in Navi Mumbai - Turbha, Mumbai, JNPT, Surat, Gandhidham, Mundra, Kandla, Chennai, Ennore, Vizag, Visakhapatnam, Kakinada, Kolkata, Haldia, PAradip, Manglore, Goa. And in GULF we have supply range for Fujairah, Dubai, Sharjah, Abu Dhabi, Saudi, Kuwait.

Our name is very popular for producer and exporter of Descaling Chemical Compound for Chiller, Condenser tube of Central AC Plant .