Corrosion Inhibitor for Gas Compressor
Corrosion Inhibitor for Gas Compressor, is formulated using high quality hydrotreated and isodewaxed mineral base inhibitor and a specialized additive package. The Corrosion Inhibitor for Gas Compressor is designed in such a way that it has excellent performance. This Corrosion Inhibitor for Gas Compressor provide excellent protection against chemical corrosion caused by the presence of hydrogen sulfide (H 2 S) in the gas stream. The protective properties of the oil, low pour point, excellent shear resistance properties provide a long and trouble-free service life.
The Corrosion Inhibitor for Gas Compressor specially designed for equipment operating in aggressive chemical environments, are chemically inert and do not leave deposits in equipment during operation.
Application
Technical Specification
| Test type | ASTM method | Corrosion Inhibitor |
| ISO VG | 100 | |
| Water content, ppm | D6304 | 20 |
| Acid number TAN, mgKOH/g | D974 | 1.32 |
| Flash and fire point | D92 | |
| Flash point, °C | 243 | |
| Ignition temperature, °С | 268 | |
| Kinematic viscosity, cSt | D445 | |
| 40°C | 107.2 | |
| 100°C | 11.7 | |
| Viscosity index | D2270 | 116 |
| Pour point, °C | D97 | -37 |
| Demulsibility | D1401 | |
| Oil-Water-Emulsion (time in minutes) | 39-40-1 (10) | |
| Volatility by NOACK | D972 | |
| Losses in % mass | 2.9 | |
| Copper Tape Corrosion | D130 | |
| 100°C, 3 hours | 1A | |
| Corrosion | D665 | |
| A - in distilled water | Pass | |
| B - in sea water | Pass |
These products are also available in other viscosity grades and packaging. Additional test results are available upon request.