CorroShield L01 Corrosion Inhibitor Closed Loop

← Back to all products
RXSOL product image coming soon
Request a Quote Email usvizagchemical @ gmail.com DocumentsRequest MSDS / TDS
Cooling Water Chemical-43

CorroShield L01 Corrosion Inhibitor Closed Loop

SKU: RXSOL-43-4020-032
High performance nitrite based closed circuit inhibitor.
Pack Size / Specification:
25, 50 Ltr, 210 Ltr packing of corossion inhibitor is blend of nitrite-borate based corrosion inhibitor containing an additional organic inhibitor to protect steel, copper and other non-ferrous metals.
Enquire About This Product →

Technical Specifications

Appearance

Colourless 

Odour

Odourless 

pH

11-12 approx
Boiling Point / Boiling Range

Not determined

Melting Point/Melting Range

N/A
Flash Point N/A
Flammability Non flammable
Autoflammability N/A
Explosive Properties N/A
Oxidising Properties N/A
Vapour Pressure Not determined
Relative Density 1.18 approx
Solubility in water  Miscible
Solubility in other solvents  Not determined
Partition coefficient and N-octanol/water  ----------
Other Data None

Application & Dosage

Engine Jacket Cooling or heating system, Chiller Water Circuit, Glycol Brine System, Hot Water or steam Circuit, Engine Coolant,Process chilling and heating system etc.

Nitrite base Corrosion Inhibitor for Water and Glycol Brine is normally fed continuously to the re-circulating closed system by injection dosing pump of dosed to the expansion tank. The amount of Nitrite base Corrosion Inhibitor for Water and Glycol Brine required to inhibit corrosion depends on the type of system and plant operating conditions. The specific dosage rates can be specified by the testing and given parameter.

 

The disadvantages of not treating the closed circuit water can be equally troubling for the system operator:-
1. Leakage in PHE and AHU due to corrosion
2. Plugging and clogging of tubes and reduced flow rate
3. Reduced heat transfer
4. Need of regular descalling that incurs shutdowns, loss of labor and time
5. Fouling of brine of chiller water

Related Information

Features and Benefits of Corrosion Inhibitor Nitrite based for CLOSED LOOP :::

Zero or negligible loss of metal or corrosion Excellent heat transferability and flow rate No need of descaling closed circuit equipments Long and extended life of Water without fouling

  • Contains Corrosion inhibitors for C.S, S.S, & Cu, which helps to extend equipment life & reduce maintenance costs.
  • Contains no heavy metals compatible with antifreeze, no environmental restrictions.
  • Completely water soluble, which enhances complete system protection.
  • Contains high concentrations of active inhibitors, thus dosage rates become more cost effective.
  • Corrosion Inhibitor Nitrite based for CLOSED LOOP is most effective at pH> 8.0.
  • Corrosion Inhibitor Nitrite based for CLOSED LOOP is formulated with a synergistic blend of nitrite and other Inhibitors.
  • Contains a blend of alkalis to offer metal passivation.
  • Contains a special dye to trace system leaks & observe Inhibitor Concentration.
  • Corrosion Inhibitor Nitrite based for CLOSED LOOP contain special Corrosion Inhibitors that can tolerate moderate heat fluxes.
  • Contains Corrosion Inhibitors for soft metals (weld joints).