Ceramic Tiles Mosaic Stain Remover

← Back to all products
House / HOTEL & CATERING-15

Ceramic Tiles Mosaic Stain Remover

SKU: RXSOL-15-1647-005

Super efficient cleaner and stripper for tiles and Mosiac 

Its cleaning principle is based on to work as Neutralizer & Salt Remover from Floor. This product is blend of Biodegradable concentrated detergent that effectively neutralizes alkaline residues and removes salt and calcium deposit on floors . Its powerful deep penetrating formula, can also be use as a super efficient cleaner that neutralizes the residual effects of strippers and cleaners. RXSOL-15-1647-005 can be use with an autoscrubber or manually with a mop.

Application

DIRECTIONS
FLOORS
: NOTE: Polished marble and terrazzo floors should be cleaned regularly with a neutral pH cleaner. NEUTRALIZER: Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor  with up to 40 parts of warm water. Apply with an autoscrubber or a mop and allow the solution work for 3 to 5 minutes. Suck up the residue with a mop or a water vacuum. Rinse with clean water and allow surface to dry thoroughly before applying sealer or finish.
CLEANER-NEUTRALIZER AND SALT-REMOVER RXSOL-15-1647-005 : Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor  with up to 10 parts of warm water. Apply with an autoscrubber or a mop and allow the solution work for 8 to 10 minutes. Suck up the residue with a mop or a water vacuum. Rinse with clean water and allow surface to dry thoroughly before applying sealer or finish.

CARPETS: NOTE: Pretest carpets for colourfastness. NEUTRALIZER FOR HIGH PH CARPET CLEANING SOLUTIONS: Dilute 1 part of Neutralizer & Salt Remover for Carpet & Floor  with up to 20 parts of warm water. Apply the solution with a sprayer and allow the solution work for 5 minutes. Suck up the residue with a carpet extractor a water vacuum. Rinse with clean water and a carpet extractor or a water vacuum.

CALCIUM AND SALT REMOVER: Dilute 1 part of RXSOL-15-1647-005 with up to 4 parts of warm water. Removes excess deposits with rigid spatula or scraper. Apply the solution with a sprayer, saturate deposit. Allow the solution work for 5 to 10 minutes. Absorb with terry towel or a carpet extractor. Rinse with clean water and a carpet extractor. NOTE: For difficult and hard to remove deposit, repeat steps 2 to 5.

Technical Specification

 

pH (as is) 2.5 – 3.0
Density (20°C) 1.04 – 1.05 g/cc
Colour Clear
Fragrance Fresh Odor
Characteristic None
Biodegradability Complete
Flash Point More than 95°C
Freezing Stability Keep out from freezing
Degradability determined in accordance with OECD no. 301D  
Pack Size / Specification:
5 Ltrs , 10 Ltrs
Enquire About This Product →