Polymer based Hold coating product, Easy to apply on SHIP HOLD SURFACE.  Slip Barrier Coats HOLD BLOCK is POLYMER BASED non-reactive coating materials which makes thin film barrier on the surface after dry. Due to the formation of RXSOL THIN barrier film on the surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Application

RXSOL HOLD BLOCK is a Heavy Duty protective Solution for hold of vessels, which carry corrosive and/or messy cargos such as sulfur salt petcock coal, and concentrates. It can be easily removed with itRecommendation Dose for smooth surface : 

for Sulphur, Salt, etc        100 Ltrs/Hold for HANDYMAX & 150 Ltrs/Hold for PANAMAX
& for Petcoke, Coal, etc   200 Ltrs/Hold for HANDYMAX & 250 Ltrs/Hold for PANAMAX

This material can be used directly with low-pressure machine or manually by a garden spray pump. in general practice on smooth & clean surface each drum of 210 ltrs cover 2000 to 2500 sq meters while on rough and rusted surfaces require more quantities of materials.

Technical Specification

• Product metal against corrosive cargo
• Products paint against cargo penetration
• Environmentally friendly
• Safe to  use in occupied / covered areas
• Reduces turn around times
• Easy to direct spray
• If hold cleaning is to be performed from tank top level only powerful equipment designed for cargo hold cleaning will do the job in a minimum of time.
• Effective cleaning chemicals that can dissolve stains and remove discoloring are required the crew needs to have effective  equipment to apply these chemicals from tank top level personal proactive equipment is required depending on type and condition of hold paint chemical that protect the paint may also be needed
• And don’t forget procedures  have to be drown up and your
• Crew  trained for the job Standardization of equipment and chemical onboard you ship will make life easier for your seaman and save your time