Carbon Remover
Carbon Cleaner solvent acts as a powerful Carbon Dissolver. We are keeping ready stock of carbon remover in 25, 50 Ltr packing.
Very effective to clean lube oil filter and also helps to clean and breaks quickly combustion products from fuel heater, oil bath, highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.
Technical Specifications
It contains Sodium Tolyltriazole ( CAS No- 64665-57-2 ) which is mainly used as antirust and corrosion inhibitor for metals (such as silver, copper, zinc, lead, nickel, etc..), and for antirust oil (tallow) products, the gas phase corrosion inhibitor of copper and copper alloy, lubricant additive, cycle water treating compound and auto antifreeze. It also can be used with manifold sterilization algaecide and has a very fine corrosion mitigation effect on close cycle cooling water system.
Application & Dosage
Solvent based Heavy-duty carbon cleaning chemical helps to dissolves carbon, resin, and varnish deposits quickly. RXSOL Carbon Remover breaks quickly combustion products from fuel heater, oil bath, highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder etc.
For removal of carbon deposits it must be used concentrated ,contained in a steel immersion bath.
SAFETY AND HANDLING:- Completely Avoid contact with eyes as irritation may occur. Do not take internally. In case of contact with eyes, flush eyes immediately and cupiously with clean running water for 15- minutes and seek medical attention.
carbon remover can be diluted with water to make it economical
carbon remover msds available on request
Its strong formulation makes it to use as a hard carbon remover
Also very effective to use as a baked carbon remover
Carbon deposit remover is a very effective to clean diesel engine parts, without scrubbing and harrashing original surface. due to its uniqunness kept this materials in best carbon removal agent
carbon deposit cleaner loosen hard deposit by emulsifying and pentrating formula.
carbon remover solvent is water missicible in nature.
Depending upon the deposition either concentrated or diluted .If used diluted use 1 part concentrate to 2-10 parts of water to yield a very effective end product. The components and machine parts are then dipped into the solvent / solution for 30 min. to 1 hr. Heavy deposition may need 12-24 hours , parts must be taken out from the bath and washed thoroughly with a high- pressure water supply jet system.
concentrated RXSOL-16-1003-025 is most effective product in its category due to its quick and complete action. can be applied for cleaning of highly soiled components. blocks, gear boxes, pistons, rings, valves, atomizers, pipes, burners, coolers, cylinder heads, injectors, tubes, oil filters , old paint and lacquers )