C SHINE Alkaline Coil Cleaner
Technical Specifications
| Appearance | Clear, Slight Yellow |
| Odor | Fresh |
| pH | Alkaline |
| Sp. Gravity | >1.15 |
Key Features
-
Heavy-duty alkaline cleaning action
-
Removes accumulated grease and oily deposits
-
Helps loosen dirt, dust and carbonaceous contamination
-
Suitable for condenser and evaporator coil cleaning
-
Useful for HVAC and air-conditioning maintenance
-
Helps improve cleanliness of heat-transfer surfaces
-
Suitable for industrial and marine maintenance applications
-
Can be applied by spray, brush or suitable cleaning equipment
-
Designed for professional maintenance and cleaning operations
Application & Dosage
Applications
HVAC & Air-Conditioning Systems
C SHINE Alkaline Coil Cleaner can be used for maintenance cleaning of:
-
Air-conditioner condenser coils
-
Evaporator coils
-
Air-cooled condensers
-
HVAC cooling coils
-
Ventilation equipment
-
Fan-coil units
-
Heat-transfer surfaces
-
Commercial and industrial AC systems
Industrial Cleaning
The product can also be considered for cleaning suitable industrial equipment contaminated with:
-
Grease
-
Oil
-
Dust
-
Atmospheric dirt
-
Carbonaceous deposits
-
Organic contamination
-
General industrial grime
Marine Applications
C SHINE may also be useful for suitable marine HVAC and machinery-maintenance applications, including cleaning external heat-transfer surfaces and air-conditioning equipment.
Using Procedure
| Method | Dilution / Concentration | Application Steps | Notes / Precautions |
|---|---|---|---|
| In-Service Cleaning | Undiluted or as per system specs | Pass through air trunking upstream of the charge air cooler. Follow with clean water rinse. | Use proper dosing and injection system. Ensure thorough rinse. |
| Typical Cleaning (Spray) | 1 part cleaner to 1–3 parts water | Apply using low-pressure sprayer. Leave for 3–7 minutes. Rinse thoroughly with water to remove all foam. | Remove all residues from roofs or surfaces to avoid deterioration. Fumes may cause irritation indoors. |
| Air Cooler / Turbocharger Cleaning | 5–25% in water | Inject cleaning solution for 10–15 minutes. Follow with equal quantity of fresh water for rinsing. | Ensure engine is off. Proper drainage required during the process. |
| Hand Spray Cleaning | Use concentrate | Spray directly on coils. Allow at least 1 hour for penetration. Rinse with high-pressure water. | Keep drain valve open during cleaning. Close after flushing. Engine must remain off. |
| Soak Method | Concentrated solution | Dip parts in solution. Allow time for deposits to loosen. Rinse thoroughly. | Ideal for stubborn carbon on metal machine parts. Wear protective gloves and goggles. |
Typical Cleaning Procedure
-
Switch off and isolate the equipment before cleaning.
-
Remove loose dust and debris from the coil surface.
-
Apply the C SHINE cleaning solution according to the current product instructions.
-
Allow suitable contact time for the cleaner to penetrate deposits.
-
Agitate heavily contaminated areas where required.
-
Rinse thoroughly with clean water.
-
Inspect the coil and repeat cleaning where necessary.
-
Allow the equipment to drain and dry before returning it to service.
Important: Exact dilution, contact time and application temperature should be selected according to the current RXSOL/Muscat Chemical TDS and the condition/material of the coil.
Suitable Cleaning Areas
C SHINE Alkaline Coil Cleaner can be used for suitable:
-
Copper coils
-
Aluminum coil assemblies
-
HVAC equipment
-
Air-conditioning units
-
Condenser assemblies
-
Evaporator assemblies
-
Industrial cooling equipment
-
Heat-transfer equipment
Material compatibility should always be confirmed before full-scale application, particularly on aluminum, galvanized surfaces, coatings, painted components and mixed-metal assemblies.
Precaution ::--
Avoid skin / eye contact. Wear gloves and goggles when using. Use in well ventilated areas. Do not breathe vapors.