Primary tabs
Bio Dispersant Cooling Water Treatment Fouling Control
Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems
Bio-Dispersant effectively cleans and disperse heavily fouled Cooling Water Systems. Fouling by microbiological slimes is reducing overall system efficiency. RXSOL bio dispersant is the powerful and concentrated product to remove and disperse the unwanted deposits, Which is resulting in water clarity. Our dual mechanism of RXSOL-40-4093-210 also effectively controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.
RXSOL-40-4093-210 is a high-performance cooling water bio-dispersant that incorporates powerful surface active agents. It is scientifically formulated for the treatment of cooling systems including recirculating and once-through cooling water systems.
RXSOL-40-4093-210 should be fed continuously or slug dosed into the system at a point where it will be mixed and uniformly distributed.
RXSOL-40-4093-210 is essentially non-corrosive and dosing equipment may be of mild steel, stainless steel, teflon, polyethylene, acrylic resin or polypropylene.
Dosage levels for RXSOL-40-4093-210 will be in the range of 1100ppm depending on the fouling tendency. Higher dosages may be required if the system is heavily fouled.
For further technical assistance concerning RXSOL-40-4093-210 please contact RXSOL Marine.
Safety, Storage & Handling
For full details concerning safety precautions, storage and handling procedures for RXSOL-40-4093-210 please refer to the latest Safety Data Sheet. To download the latest safety data for this product use the following link:
|
Fprm: |
Liquid |
|
Colour: |
Yellow or Brown |
|
Odour: |
Slight |
|
pH: |
6.5 |
|
Relative density: |
1.05 |
|
Solubility in water: |
Complete |
|
Boiling point: |
~100 0C |
|
Flash point: |
>100oC |
*Full details of the product properties are available in the Safety Data Sheet.
High performance cooling water bio-dispersant
RXSOL-40-4093-210 is a high specification product developed to improve the performance of cooling water systems where fouling by microbiological slimes is reducing overall system efficiency, by removing and dispersing the unwanted deposits.
RXSOL-40-4093-210 is extremely effective at controlling oil based fouling and is the ideal solution for use in both re-circulating and once-through cooling water systems.