Asphalt Release Agent RXSOL

← Back to all products
Asphalt Release / Products-90

Asphalt Release Agent RXSOL

SKU: RXSOL-90-4162-210
Asphalt Release Agent is a completely biodegradable lubricant
Pack Size / Specification:
25 Ltrs, 210 Ltrs
Enquire About This Product →

Technical Specifications

 
Appearance  : Clear Pale Straw Viscous Liquid
Odour  : Glycol Ether Odour 
pH 1% Soln.  : 7
Boiling Point  : > 212F
Specific Gravity  : 0.96 g/ml
Viscosity  : 10 cps
Solubility in Water  : Complete
Misc. Physical Data  : NA
 

Application & Dosage

Prevents buildup of asphalt in truck beds.

Use as a slip coating on floor, walls, and tailgate of asphalt trucks and equipment to prevent adhesion of asphalt. Especially useful for: Building Contractors, Equipment Rental & Leasing Highway Paving Contractors

Can be used in automated spray systems. It can be diluted with water at a ratio of 1:1 or up to 8 : 1. It can also be used in concentrated form as a cleaner for asphalt tools and equipment.
 

Once applied to the truck bed, a micro-thin film spreads out across the truck bed. This film creates a negative electrostatic charge on both the surface of the truck bed and the asphalt. This causes electrostatic repulsions preventing the asphalt from sticking to the surface of the truck bed.

Usually three hauls can be made before another application is required. Other Asphalt release agents require an application for each load. This product, Asphalt Release Agent Rx only requires repeated applications if hauling SMA or other polymer type mixes.

 

DIRECTIONS for better Asphalt Release from Truck Beds

Parameter

Instructions

Application Method

Apply Zep Asphalt Release Agent/R-6690 using a Zep Model 294DM Foamer or a Zep Foam Cannon.

Dilution Ratio

1 part product to 7-10 parts water.

Water Pressure

Suggested foamer setting: 40-80 PSI water pressure.

Air Pressure

Air pressure should be set approximately 10 PSI higher than water pressure to produce a proper, stable foam.

Application

Apply a single layer of foam to truck walls, floors, and tailgates.

Precaution

DO NOT overspray.

Equipment Cleaning

Coat other equipment surfaces in a similar manner to aid in clean-up.

Related Information