Gas duster, canned air Distributor Manufacturer in Visakhapatnam india
Gas duster, also known as canned air, is a product used for cleaning or dusting electronic equipment and other sensitive devices that cannot be cleaned using water.The products are most often a can that, when a trigger is pressed, blasts a stream of compressed gas through a nozzle. Despite the name "canned air", the cans actually contain gases that are compressable into liquids. True liquid air is not practical, as it cannot be stored in metal spray cans due to extreme pressure and temperature requirements. Common duster gases are 1,1-difluoroethane, 1,1,1-trifluoroethane, or 1,1,1,2-tetrafluoroethane. Hydrocarbons, like butane, were often used in the past, but their flammable nature forced manufacturers to use fluorocarbons.
Uses
Canned air can be used for cleaning dust off surfaces such as keyboards, as well as sensitive electronics in which moisture is not desired. When using canned air, it is recommended to not hold the can upside down, as this can result in spraying liquid on to the surface. The liquid, when released from the can, boils at a very low temperature, rapidly cooling any surface it touches. This can cause mild to moderate frostbite on contact with skin, especially if the can is held upside down. Also, the can gets very cold during extended use; holding the can itself can result in cold burns.
A dust spray can often be used as a freeze spray. Many gas dusters contain HFC-134a (tetrafluoroethane), which is widely used as a propellant and refrigerant. HFC-134a sold for those purposes is often sold at a higher price, which has led to the practice of using gas dusters as a less expensive source of HFCs for those purposes. Adapters have been built for such purposes, though in most cases, use of such adapters will void the warranty on the equipment they are used with. One example of this practice is the case of airsoft gas guns, which use HFC-134a as the compressed gas. Several vendors sell "duster adapters" for use with airsoft guns, though it is necessary to add a lubricant when using gas dusters to power airsoft guns.
Leave a comment