Iron Ore Red Dust Cleaner
Iron Ore Red Dust Cleaner is available in various sizes and packing. We are keeping ready stock of rust remover in 30, 50, 220 LTR packing.
Technical Specifications
Iron Ore Red Dust Cleaner Usage Directions
Directions for Use
In general Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate.
And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.
Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.
Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.
Application & Dosage
Test Iron Ore Red Dust Cleaner on a small inconspicuous area before use.
Do not apply Iron Ore Red Dust Cleaner undiluted.
A more concentrate dilution may be required where concrete has been cured for an extended period of time.
Do not leave Iron Ore Red Dust Cleaner on any surface for extended periods of time.
To maintain product integrity, keep container sealed when not in use.
Use 10 to 20% of Iron Ore Red Dust Cleaner with fresh water and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet. Click for More details http://rxmarine.com/Iron-Ore-cleaning-direction
If hardness contaminations remain repeat the process. Also cleaning property can be increase at temperature of 75 to 80 ‘C