Primary tabs
Corrosion Scale Inhibitor Phosphate Based
Corrosion and Scale Inhibitor with Phosphates and Polyphosphates.
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System. Phosphates and zinc stabilizer for anti-scale / anti-corrosion water treatment formulations. Also demonstrates excellent efficiency in the presence of soluble iron where acrylic polymers fail. Excellent dispersant for iron oxides.
Corrosion Scale Inhibitor Phosphate Based is a multi-metal corrosion inhibitor designed for use in open loop cooling water systems. It provides effective protection for mild steel, copper, and yellow metals, while minimizing scale and deposit formation. The formulation combines proprietory polymers specially manufactured for superior film-forming and corrosion control under various water qualities.
Corrosion Inhibitor OPEN Cooling System scientifically formulated to keep clean open recirculating systems and also prevent from scale formation . Chemically Corrosion Inhibitor OPEN Cooling System will disperse scale and corrosive products, silt etc and can be used as an anti-foulant along with other treatments.
Excellent scale inhibition for a variety of applications including cooling circuits, boilers and RO units.
It is widely used in Boilers, cooling water and membranes
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System is highly concentrated cooling water treatment product, Its small dosage from 0.5 – 1 liter per 10 Tons of Cooling Water. The source of water also directly affecting its dosage as The dosage depends on the quality of the supply water ( Total hardness and Chloride content as low as possible) . Control is by simple colourismetric test.
Optimum result of COOLING SYSTEM can be obtained by maintaing pH level 8 to 8.5 and Total phosphate level should be maintained between 20 and 30 ppm.
Feel free to ask for RXSOL PHOSPHATE TEST KIT, RXSOL HARDNESS TEST KIT, RXSOL CHLORIDE TEST KIT. We are keeping full range of TEST KIT.
| System Type | Typical Dosage |
|---|---|
| Open Loop Cooling Towers | 50 – 150 ppm in recirculating water |
| High-corrosion conditions | Up to 200 ppm based on metallurgy and water quality |
| pH Control Range | Operates best between pH 7.0 – 8.5 |
- Dosing Method: Continuous injection via dosing pump into cooling water basin or line.
-
Monitoring: Maintain residual phosphate at 2–5 ppm and zinc at 0.5–1.5 ppm in system water
- Compatible with: Sodium hypochlorite, non-oxidizing biocides, anti-scalants.
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System compatible with nylon, neoprene or rubber jointings.
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System is a combined dispersant and anti-foulant and corrosion inhibitor which is specially formulated for the prevention of scale, deposits and corrosion in open fresh water, cooling systems.
| Feature | Benefit |
|---|---|
| Multi-metal protection | Effective for steel, copper, and brass |
| Polyphosphate base | Film-forming corrosion inhibition + sequestering |
| Zinc synergy | Boosts performance, even in aggressive waters |
| Triazole addition | Superior copper/brass protection |
| Dispersant included | Minimizes fouling from calcium or debris |
| Easy to dose | Liquid product, fully water-soluble |
| Environmentally safer | Alternative to chromate-based inhibitors |
| Property | Value |
|---|---|
| Appearance | Clear to slightly hazy amber liquid |
| Odor | Mild characteristic |
| pH (as supplied) | Alkaline |
| Specific Gravity @ 25°C | 1.10 – 1.20 |
| Solubility | Fully water soluble |
| Freeze Point | Below 0°C |
| Shelf Life | 12 months (sealed container) |
ADVANTAGES of RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System
Its regular doses increases Higher efficiency
RXSOL OC is Corrosion Inhibitor OPEN Cooling water circulation System - Reduced Maintenance down time - Increased production
Non Toxic - Easy and Safe in use