Primary tabs
AMMONIUM Bifluoride Crystal
If the acid used in the working mixture of hydrofluoric acid (45%), it would take 1.55 times more than if we use a dry ammonium bifluoride.
Ammonium Bifluoride is a white crystalline solid. It is soluble in water. It is noncombustible. It is corrosive to aluminum. It is used in chemical analysis, in brewing, and as a preservative for wood.
Ammonium Bifluoride successfully replaces the traditional, but a dangerous and aggressive material - hydrofluoric acid, which is very aggressive, corrodes many materials, causing severe burns, releases harmful to breathe fumes. Ammonium bifluoride use instead of hydrofluoric acid is safer for use, storage and transportation and is less harmful, and reduce your costs by 10 - 15%.
Glazier:
Matt drawing on glass can be obtained chemically. For this glass coated with a thin layer of wax. Prepared in advance figure is placed on the reverse side of the glass to the light, and the blunt end of the needle scratched necessary in paraffin sections. Then, using clay to make the glass cell and poured back etching solutions based on ammonium bifluoride.
Ammonium bifluoride use instead of hydrofluoric acid greatly simplifies the processing of glass, making it safer and less harmful, and reduce your costs by 10 - 15%.
Petroleum:
In oil extraction method has been successfully applied acidizing bottom-hole, you can restore and improve the filtration characteristics, dissolve and loosen deposits in the well and increase the permeability layer zones and thus debit wells.
Usually for cooking acidic mixture used technical Hydrofluoric acid. When you replace it on ammonium bifluoride savings of 10-15%. For comparison, if the acid used in the working mixture of hydrofluoric acid (45%), it would take 1.55 times more than if we use a dry ammonium bifluoride.
Etching and engraving glass
For chemical glass matting
Cleaning boilers and pipes from rust
As a substitute for hydrofluoric acid
Wash oil pipelines
To dissolve deposits in the wells
Bottomhole treatment
We are pioneer for various chemicals suppliers and manufacturers of ammonium bifluoride, potassium bifluoride, sodium bifluoride, ammonium difluoride, potassium difluoride etc
CAS Number: 1341-49-7
UN number: 1727
Boiling point: 240 °C (464 °F; 513 K)
EC Number: 215-676-4
Molecular Weight: 57.04 g/mol
Molecular Formula: NH4HF2
Ammonium bifluoride [NH4.HF2]
Melting point :124.6°C (Sublimes at higher temperature)
Boiling point : 239.5°C
When dissolved in water, cooling takes place. Material is Hygroscopic at 50% humidity.
Analysis
Appearance : White crystalline solid (Orthorhombic crystals)
NH4HF2 : 98.76%*
(NH4)2SO4 : 0.05%
(NH4)2SiF6 :0.20%
Moisture :0.59%
Solubility in water : 60.2 g at 20°C and 156.4g at 60°C per 100ml of water
Solubility in HCl : 10% (w/v) sample is soluble in 15% (w/w) of HCl at 25°C
*Assay: Weigh accurately about 1.0gm of Ammonium bi fluoride sample. Dissolve it in 100ml distilled water. Titrate with about 1N NaOH. Use Phenolphthalein as indicator. End point is Colourless to Pink.
% acidity as HF = A / B
1st calculate Consumption of NaOH, B.R. X Normality of NaOH X 0.02 X 100 = A
Then Divided the result with " Weight of the sample " = B
%NH4HF= %acidityasHFx57 / 20
Ammonium bifluoride is a white crystal salt chemically when ammonium bifluoride comes in contact with water resulting with the formation of HF. It is used to brighten aluminum and other metals.