Primary tabs
Advance Tankclean
Biodegradable surfactants based tank cleaner This product is very common to use for removing of traces HYDROCARBONS from the tank, after cleaning of TANKS from solvent base tank cleaning materials. when possibilities of next cargo will contaminate with hydrocarbon.
This product is very common to use for removing of traces HYDROCARBONS from the tank, after cleaning of TANKS from solvent base tank cleaning materials. when possibilities of next cargo will contaminate with hydrocarbon.
After uses of solvent type cleaner to make Hydrocarbon free tank, RINSE the tank Throughly—preferably with running continuous water. For critical Tank cleaning, Make a fresh 1% solution of Advance Tank cleaner in cold, warm, or hot water. If available use warm water. For difficult soils, raise water temperature and use more detergent.
Re-circulation Method:–
Fill tank with fresh water and heat up to warm 30-40oC . Then start adding Advance Tank cleaner 0.03 to 9% ( for general wash use 300 ML for 1000 Ltr water and ratio can be increase upto 9 Ltrs for 1000 Ltr water ) to circulate the water. A stronger solution can be made for critical cleaning. Finally lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material. Use a strainer at the pump stack when circulating any solution. Finally rinse the tank with hot water.
RXSOL-20-2084-210 is a balanced formulation of emulsifier and natural solvent detergent agents which makes excellent for use with all types of metals
Concentrated to save you money
• Biodegradable and readily disposable
• Penetrating wetting power to save you time
The most important feature of Advance Tankclean is Splits after cleaning, releasing the oil phase for reclamation. The microemulsion-based formulation that combines the performance of a water and solvent based product into one low toxic product.
Odour |
Characteristic odour Sweet orange |
Appearance |
Clear Liquid or Greenish Colur , Soluble in water |
pH |
7.5 - 8 |
Boiling point |
100 °C at 760 mm /Hg |
Vapour pressure |
not known |
Freezing point |
<0 °C at 760 mm/Hg |
Completely soluble in water |
|
Specific gravity (water=1) |
0.99 to 1 |
- Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents.